Model NO.: STW
Customized: Customized
Advantage: Simple Structure
Condition: New
Suitable Material: Q235,Q345,G550 for Gi,PPGI,Gl,PPGL
Suitable Thickness: 0.4mm~0.7mm
Machine Type: Cold Roll Forming Machine
Final Product: Metal Tile,Roof Tile,Corrugated Sheet,Purlin
Main Motor Power: 3kw
Control System: Mitsibishi PLC
Forming Speed: 15m/Min
Trademark: STW
Transport Package: Sea Package
Specification: CE
Origin: China Mainland
HS Code: 8845210
Professional Expert Manufacturer of roof sheet making machine
STWYX15-225-900
Components:
- The uncoiler and its base
- Coil sheet guiding and adjusting equipment
- Film covered device
- Main roll forming system
- Post- Cutting device
- Hydraulic station
- PLC control System
- Support table
Material of Roll former system:
- Roller: High grade No. 45 forged steel, plated hard chromed on the surface of rollers with thickness 0.05mm.
- Active shaft material: High grade No. 45 carbon wrought steel at diameter 75mm.
- Cutting blade: Cr12 mould steel with quenched treatment.
Working flow:
Decoiling the sheet- - - Guiding the sheet- - - Covering the film- - - Roll forming- - - Measuring the length- - - Cutting the panel- - - Panels to the supporter.
Our machine's warranty time:
We offer 12 months quality grantee time starting from the date of delivery. When delivery, we will ship a set of wearing parts for free; Within the warranty period, maintenance of equipments and replacement of parts of equipment are charge-free.
After-sale service:
We offer sale after service for life. The machine will be inspected well in our workshop before delivery. We will send one technician to your factory to install the machine if you need extra installation, training service; The seller should arrange offer technical back-up and assign a technician people to the buyer's part.
| No. |
      item |
Parameter(all is subject to our final design) |
1
 |
Suitable raw material |
Type |
Common galvanized & pre-painted steel |
| Yield strength |
235MPa(or other high strength steel) |
| Thickness(mm) |
0.4-0.7 |
| width(mm) |
According to final design |
| 2 |
Manual uncoiler's capacity |
Max.5tons |
| 3 |
Forming speed(m/min) |
About 18-20m/min |
| 4 |
Main motor power(KW) |
7.5kw |
| 5 |
Hydraulic power(KW) |
3kw |
| 6 |
Forming roller groups |
Around19-20Â groups |
| 7 |
Raw material of forming roller |
High quality No.45 steel |
| 8 |
Raw material of cutting blade |
Cr12mould steel with quenched treatment |
| 9 |
controlling system |
Mitsubishi PLC& converter |
| 10 |
Suitable industrial voltage |
 According to your special requirement |
| 11 |
Machine dimensions(L*W*H) |
6.8m×1.8m×1.52m |
| 12 |
Machine weight |
About 9-10tons |
The 3s120 series pump is mainly used in oil field high pressure water injection and various types of equipment with hydraulic power as the main power. This type of high pressure Water Injection Pump is simple in structure, convenient in maintenance and fully satisfied with the high pressure process requirements of the oil field.
Reciprocating Plunger Pump 3S120series
Triplex Plunger Pump Reciprocating Pump,Five Horizontal Single-Action Cylinder,Water Jet Plunger Mud Pump
Tianjin RongHeng Group LLC , http://www.ronghenggrouppump.com