Degong DG980 loader test has a good energy-saving effect

A few days ago, the editor of the China Construction Machinery Business Network learned from the German engineering office that the German DG980 loader was under trial. It is understood that on December 21, 2011, the German DG968 loader accepted the identification and acceptance of relevant experts from the Dezhou City Economic and Credit Commission. The expert acceptance committee heard the project report, reviewed the product drawings and technical documents, and examined the prototype. And the production conditions, after review, that the German engineering DG968 loader main technical performance indicators have reached the leading level of domestic similar products, unanimously agreed to pass the identification and acceptance.


Germany DG980 loader test

Germany DG980 loader test

Germany DG980 loader test

DG968 loader adopts temperature-controlled heat dissipation system, which has good energy-saving effect. For the first time, the planetary power shift gearbox is used in medium and large tonnage wheel loaders in China, which makes light and flexible operation and high reliability. The work hydraulic pressure-sensitive control system makes the engine power. The matching is reasonable, the power is fully utilized, and the energy saving effect is good.
Degong DG980 loader main performance characteristics:
1. The use of the Weichai Steyr engine has a large power reserve, low fuel consumption, electrical start-up, electrical shutdown, energy saving and environmental protection, high reliability, and easy operation.
2, using electronically controlled power shift transmission, traction, shifting light.
3, working hydraulic double pump confluence pilot operation, light and flexible.
4. The steering hydraulic system adopts a preferential type flow amplifying valve. The low pressure and small flow pilot oil controls the high pressure and large flow steering oil. The steering is light, flexible and stable.
5. Optimized design of the working device, rational arrangement of hinge points, large lifting force, large lifting force, dust-proof pin, sleeve structure, prevention of sediment and dust entering, extended lubrication time and service life.
6. Two-pipe traffic brake, low-voltage protection, emergency brake and parking brake are combined to ensure the safety of operation.

Related Developments: å¾·å·¥ Loader
Copyright Notice:
This article is China Engineering Machinery Business Network () original, if you need to reprint must be in the form of hyperlinks to indicate the source, is strictly prohibited from any changes in the original text.

Batch Waste Plastic Pyrolysis Plant

Batch Waste Plastic Pyrolysis Plant

Pyrolysis Plant is used for recycling waste tire, waste plastic, waste rubber to fuel oil. According to the actual situation in every country and district, we developed different models of Batch Pyrolysis Plants for waste tires, rubber and plastic with daily capacity 5 -10 tons.

Batch Waste Plastic Pyrolysis Plant

Flow-chat of Batch Waste Plastic Pyrolysis Plant

Batch Waste Plastic Pyrolysis Plant

Advantages of Batch Waste Plastic Pyrolysis Plant

1. Full open door design: Speedy loading in and steel pulling out; Easily cooling down after one batch finished, saving time; No leaking with special high temperature flexible graphite packing.

2. Unique Craft Condensers: High condensing efficiency with more oil output. Good quality oil, longer lifetime, and easy to clean.

3. National Patent Unique Smoke Scrubbers: More efficient removal of the acid gas and dust of the smoke by neutralization, purification and absorption, environmental friendly without pollution.

4. National Patent Carbon Black Discharging System: Speedy fully enclosed Auto-discharging under high temperature, avoiding carbon black pollution, saving time.

5. Automatic Submerged welding technology, ultrasonic nondestructive testing, both manual and the automatic safety devices.

6. Sync Gas Recycling System: Fully burned after recycling and utilization, saving fuel and preventing pollution.

7. Direct Heating System: Enlarging heating square to lengthen the lifespan of the reactor and easy to control the temperature.

8. National Patent, unique heat insulation shell; high efficiency temperature keeping, excellent energy-saving effect.

Technical Parameter of Batch Waste Plastic Pyrolysis Plant

NO.

ITEM

PROJECT

1

Equipment Model

XY-7

XY-8

2

Door Model

Full Open Door

Full Open Door

3

Suitable Raw Materials

Rubber/Plastic Products

Rubber/Plastic Products

4

Structure

Horizontal Type Revolves

Horizontal Type Revolves

5

Reactor Size

Φ2200*6000mm Φ2600*6600mm

Φ2200*6000mm Φ2600*6600mm

6

Capacity for One Batch

5-6Mt; 8-10Mt

5-6Mt; 8-10Mt

7

Oil Yield of Tires

40%-45%

40%-45%

8

Work Pressure

Normal Pressure

Normal Pressure

9

Reactor Rotation Speed

0.4R/M

0.4R/M

10

Fuels Choice

Coal, Wood

Coal, Wood, Gas, Oil

11

Power

18KW/H

18-25KW/H

12

Cooling Method

Water Cycling

Water Cycling

13

Type of Drive

External Annular Gear

External Annular Gear

14

Heating Method

Direct

Direct

15

Type of Installation

With Foundation

With Foundation/Integrated Base

16

Noise dB(A)

≦85

≦85

17

Operation Mode

Intermittent Operation

Intermittent Operation

18

Total Weight(MT)

25-40

25-40

19

Installation Space Required

30m*10m

30m*10m

20

Manpower

3~4/batch

3~4/batch

21

Shipment

Ф2200×6000=1*40HC+1*40FR

Ф2600×6600=2*40HC+1*40FR

Ф2200×6000=1*40HC+1*40FR

Ф2600×6600=2*40HC+1*40FR

Batch Waste Plastic Pyrolysis Plant,Fuel From Plastic Waste,Plastic To Oil Machine

Shangqiu Jinpeng Industrial Co., Ltd. , https://www.recyclingthewaste.com