Car wheel maintenance and scratch repair method
Most of the people who wear cars will put on a glamorous outfit from head to toe. The wheels are like the “shoes†of a car. The perfect shape of the car. If paired with a pair of very common “shoesâ€, the overall image will be Great discounts, so don't ignore the wheels when you're in a car. The visual impression of the wheel hub gives the first impression. It is this seemingly inattentive place that can express the taste of the owner just right.
When the surface of the hub has hard-to-remove stains, professional cleaning agents are used. This cleaning agent can gently and effectively remove stains and reduce the damage to the aluminum alloy surface. In addition, there is a layer of metal protective film on the hub itself, so be careful not to use paint brighteners or other abrasive materials when cleaning. Care must be taken in the driving process to avoid scratching the hub caused by the "hard", once the scratches or deformation, it should be repaired and repainted as soon as possible.
To avoid this phenomenon, the car must be diligent in flushing the rim when it is renewed. Every day, the vehicle must wash the rim at least once a week. After rinsing it with clean water, it should be brushed with detergent and then scrubbed. Rinse again with plenty of water.
If the car has been in motion for some time, it is usually not as diligent as cleaning and maintenance, and a hard dark brown coking has formed on the rim. Use a stronger rim cleaner.
After removing the coke, you must have patience. After spraying with a special detergent, you must wait for a while to allow the solvent to soften the coke, then brush it off with a sponge or a coarse cloth, and then rinse with water.
Select fresh and comfortable style to pay attention to care, do not worry, some serious coking requires two or three cleansing moves can only be completely removed. Those who do not like to do their own maintenance of the car, it is best to choose the rims for the first time when buying a car, so they will choose the “fresh†shape with a simple and clear appearance, no complicated structures, and no small screws. It's easier to get up.
The following are the specific steps to repair:
1. Check the flaw. If it does not hurt the inside of the hub, it can be easily repaired. Use paint thinner, wipe around the wound, and remove the dirt.
2. It is difficult to remove the dirt from the deepest part of the scratch. At this time, it can be completely cleaned with a toothpick.
3. In order to prevent the irrelevant part from being painted by mistake, it is best to carefully stick the adhesive tape around the flaw.
4. Finishing the tip of the brush, applying a finishing lacquer, the paint shrinks slightly after drying, and it is best to spread it slightly.
5. It will take about a week after coating to dry completely. After drying, smear with soapy water on a paper towel to make the surface smooth.
6. After wiping with water-resistant paper, wipe the light with the mixture and then wax it.
For deeper flaws, the focus is to see if the metal surface is exposed. If the metal surface cannot be seen, it will not rust, and you can concentrate on applying the finishing paint.
Use a pen tip to point it up little by little and wait for the paint to dry completely.
Daily maintenance is also indispensable. When the hub temperature is high, it should be allowed to cool naturally and then cleaned. Do not use cold water for cleaning. Otherwise, the aluminum alloy hub may be damaged, and even the brake disc may be deformed to affect the braking effect. In addition, cleaning the aluminum Taiwan gold hub with a detergent at a high temperature will cause a chemical reaction on the surface of the hub, which will lose its luster and affect the appearance.
When the hub is stained with hard-to-clear asphalt, if the general cleaning agent does not help, use a brush to try to clear, but do not use a hard brush, especially the iron brush, so as not to damage the hub surface. Here, introduce to the private car owners a remedy for removing the tar: Use the medicinal "active oil" to rub and get unexpected results. Try it out. If the area where the vehicle is located is wet or close to the waterfront, the wheels should be cleaned frequently to avoid salt corrosion on the aluminum surface. When necessary, it can be waxed and maintained to keep its luster.
Helper have designed and manufactured food processing machines and equipment since 1986. Now we can provide our clients excellent solutions in the field of meat and pastry processing, such as sausage and Ham Production Line, quick frozen leisure foods, pet foods and cheese processing, fresh and cooked noodle line, dumpling and bakery products etc. The company has been obtaining success through the persistence of quality and service, as well as by knowing customers, understanding products, implementing diversification competitive strategy and focusing on high quality and good performance machinery research and development.
Sausage Production Line,Applications In Food Industrial,Quick Frozen Foods,Ham Production Line
Shijiazhuang Helper Food Machinery Co., Ltd. , http://www.ihelpergroup.com