Oscilloscope's correct selection criteria

The selection of an oscilloscope is a problem that seems simple and difficult for you to handle. There are many products on the market and the technologies vary. Sometimes it is difficult for you to make decisions. The above instructions may give you some advice and will be of great help in your selection process. Based on years of experience, the oscilloscope has the following "rules of thumb":

The ART analog oscilloscopes select four factors: the price/performance ratio (comparative advantage of the price and product quality brand), the test bandwidth (5 times the rule of thumb), the number of channels (2 or 4), and the supplier capability (whether the after-sales service is guaranteed).

DSO digital storage oscilloscopes find a balance between test signal bandwidth, oscilloscope bandwidth, oscilloscope real-time sampling rate, and oscilloscope storage depth. The following experiences are available: oscilloscope bandwidth is preferably 5 times the signal bandwidth; oscilloscope real-time sampling rate is ≥ 4 times Oscilloscope bandwidth; memory depth ≥ sampling rate × maximum retention time required.

DPO digital-analog oscilloscopes are consistent with the DSO in terms of basic index requirements, but need to introduce two capabilities: screen refresh rate, waveform triggering and analysis capabilities.

Special function requirements. 1 If you need to work in the field and need battery power, the volume of the instrument is very strict. Besides the oscilloscope measurement, the function of the instrument needs other tests (such as the multimeter function). At this time, you are better to use a hand-held oscilloscope ( HSO). 2 If you are isolated or floating, safety cannot be guaranteed, and you need to analyze the power, phase shift, please use isolation oscilloscope (DIO), especially multi-channel DIO. 3 If you need multi-channel analog and digital signal mix testing, you should choose MSO hybrid oscilloscope besides oscilloscope with serial bus trigger function.

CD1/MD1 Electric Hoist

CD1/MD1 type wire rope Electric Hoist can be widely used to lifting heavy objects, or installed on the straight or curve I-steel beam of single-girder cranes. They can also be used together with electirc hoist double-girder, gantry crane and slewing cranes. All the above has made the electric hoists common in industrial and mine enterprises, railway, wharfs and warehouses.


T 0.25 0.5 1 2 3 5 10
Lifting height
M 3/9/17 6/12/17 6/30/17 6/30/17 6/30/17 6/30/17 9/30/17
Lifting speed
m/min 88/0.8 88/0.8 88/0.8 88/0.8 88/0.8 88/0.8 77/0.7
Running speed

Wirerope type

6×19-3.6 6×37-4.8-180 6×37-7.4-180 6×37-11-155 6×37-13-170 6×37-15-200 6×37-15-200
I beam tack type

16-22b 16-28b 16-28b 20a-32c 20a-32c 25a-63c 28a-63c
Loop track minimum radius
M 0.8 1.5 1.5-4 2/4/17 2/4/17 2.5-5 3.5-9
Lifting motor Model
Zd1 12-4 Zd112-4 Zd122-4 Zd131-4 Zd1 32-4 Zd1 41-4 Zd1 51-4

zds10.2/1.5 Zds10.2/1.5 Zds10.4/3 Zds1 0.4/4.5 Zds1 0.8/7.5 Zds11.5/1.3

Capacity Kw 0.4 0.8 0.2/0.8 1.5 0.2/0.8 3 0.4/3 4.5 0.4/4.5 

r.p.m r/min 1380 1380 1380 1380 1380 1400 1400

3p 380v 50hz

Running motor Model
Dw5024 Zdy1 11-4 Zdy1 11-4 Zdy1 12-4 Zdy1 12-4 Zdy121-4 Zdy121-41

Capacity Kw 0.06 0.2 0.2 0.4 0.4 0.8 0.8×2

r.p.m r/min 1400 1380 1380 1380 1380 1380 1380

3p  380v 50hz

CD1/MD1 Electric Hoist

CD1/MD1 Electric Hoist,Chain Electric Hoist ,CD1/MD1 Type Electric Hoist,Electric Wire Rope Hoist

Hebei Lihua Hoisting Machinery Manufacturing Co., Ltd , http://www.lhqzhoisting.com