· Kia recalled more than 12,000 Sorento due to accelerator pedal defects

According to reports, Kia will recall 12,361 2016 Sorento in the United States, because its accelerator pedal may stop functioning properly. The recalled vehicles were produced between October 27, 2014 and January 29 this year.

According to the recall document of the National Highway Traffic Safety Administration, the capacitors on the throttle device circuit board may be improperly soldered, which may cause the 2016 Sorento to enter emergency operation mode or in some cases enter forced idle mode. These two modes are only allowed. Idle speed. In either case, the engine fault indicator or electronic stability control light on the instrument panel is likely to illuminate. If this fault occurs, the car's acceleration will be too dangerous for the driver.

In order to repair this defect, Kia will replace the existing set of accelerator pedal devices for free and install a modified set of equipment, which takes about one hour.

    Furniture refers to movable objects intended to support various human activities such as seating (e.g., chairs, stools, and sofas), eating (tables), and sleeping (e.g., beds). Furniture is also used to hold objects at a convenient height for work (as horizontal surfaces above the ground, such as tables and desks), or to store things (e.g., cupboards and shelves). Furniture can be a product of design and is considered a form of decorative art. In addition to furniture's functional role, it can serve a symbolic or religious purpose. It can be made from many materials, including metal, plastic, and wood.

    Metal furniture is a type of furniture that uses metal parts in its construction. There are various types of metal that can be used, such as iron, aluminium, and stainless steel.

    Aluminum is a light and corrosion resistant metal,and to take advantage of these qualities, it is heavily utilized for stamped and cast furniture, especially in the category of molded chairs. Aluminum atoms form an outer layer of Aluminum Oxide, which prevents the internal aluminum from being corroded.

Metal furniture is a popular choice of furnishings, especially used outdoors for decks and patios. However, metal furniture can also be used indoors, such as brass beds, brass tables, iron bakers racks and metal curio cabinets. Besides being sturdy, metal furniture is attractive, giving a contemporary look to your home.Xinyu Mould manufacturing all types of aluminum casting furniture product HPDC dies and components.

 furniture component



Xinyu Mould Capabilities

  • Xinyu Mould At Glance

1.Year Of Establishment:2002

2.Location:2 (One Is Brand New)

3.Land Area:3600sqm

4.Emplyees:120

5. Equipment;CNC:18 (Makino, Toshiba, Liyang ), WEDM:10, EDM:9, Spotting Machine:2, CMM:2, Gun Drill Machine:2, Die Casting Machine:7, Others:50


  • Xinyu Mould Technical Profile

1. Engineers In 2d&3d: 16

2. Engineers In Cnc Programming:6

3.File Format For 2d: Dwg&Dxf

4.File Format For 3d:Iges&Step

5.Software For 2d:CAD

6.Software For 3d:Simens NX & Pro-E 

7.Software For Programming: Powermill

8.Software For Mould Flow: Magma 


  • Xinyu Mould Process Control

1.MES Process Control System

2.IATF 16949 Quality System

3.Well-Trained Operators

4.CMM Inspection 


  • Xinyu Mould Advantages

1. CAE Support Magma(Lid 18175001)

2.Rich Experience In Casting Dies For Auto Structual Parts,Powertrain;Oil Pan;Redirector; AC Compressor

3.Trial Run Machines Available In House From 160t To 1600t

4.Vaccum Venting System Application In Dies

5. Partial Squeeze Skill In Dies

6.High Precision Imported CNC(5 Axis)

7.Globalized Hr Concept 

  • Xinyu Mould Die Capacity

1.Max Die Size:2500*2500*1800

2.Max Die Tonnage:2500t

3.Biggest Die Casting Machine:1600t

4.Most Complex Die: 11slides

5.Yearly Capacity:350sets 


  • Xinyu Mould Marketing

1.Main Market:Na;Europe;Asia

2.Main Field: Auto;Telecommunication;

Lighting;General Machinery;Power Tool

Furniture

3.Partner Offering After Sales Service:

Available In India&Us,Europe

4.Business Involved:

Aluminum Die Casting Dies

Aluminum Die Casting Components 


  • Xinyu Mould Commercial Terms&Conditions

1. Fob Ningbo/Shanghai

2.Payment Term:Tt

3.For Dies:50% Down Payment 50% Prior To Delivery

4. For Castings: 10% Down Payment

The Rest Within 30days After b/l Date

5.Leadtime For Quotation:2days

6.Feedback For Customers' Query:24hours



Aluminium Castings For Furniture and other parts

Aluminium Castings For Furniture,Furniture Aluminium Castings, Aluminum Die Casting For Furniture,Custom Furniture Aluminium Castings

Ningbo Beilun XinYu Mould Manufacturing Co.Ltd. , http://www.xinyudiecasting.com