A good way to save money by plumbing

The viscosity of oil used in pipeline dredging vehicles is one of the most important indicators. When the value marked on the oil is smaller, it indicates that the viscosity of the oil is very thin, which proves that the fluidity of this oil will be better. It is more appropriate to use the engine in a relatively low temperature environment, when the vehicle is being dredged in a cold start, the vehicle's engine can be better protected. The figure behind the oil W is the indicator of the high temperature resistance of the oil. When this value is increasing, it shows that the oil can have very good protection performance under high temperature environment. However, if the viscosity of the engine oil is too high, it will also cause an increase in the resistance of the parts in the engine of the pipeline-driving car, which will increase the fuel consumption of the pipeline-driving car and also consume more power. Therefore, when adding engine oil to a vehicle, it must be reasonably added according to the current weather conditions.

In the process of driving, the plumbing vehicle must be timely and correctly switch gears. This kind of situation is usually more likely to appear on the body of the new driver. When the driving speed of the vehicle is relatively high, However, it did not reach the right gear. As the engine speed of the vehicle becomes higher and higher, its fuel consumption will increase accordingly. Therefore, at a proper speed, we must correctly hit the right gear at a reasonable time. And when the vehicle is running at a low speed, the gear is still parked on the high-end, not only is it easy to hurt the engine, but also suddenly turned off.

If you do not need to, you must choose to drive at a constant speed instead of increasing the speed of the accelerator. When you increase the throttle, your fuel consumption will increase directly. Opening the air conditioner in the summer will certainly cool people, but the fuel consumption will increase at the same time after turning on the air conditioner. If you are considering the fuel economy in the case of high-speed driving, turn off the air conditioner and select the window to blow the air. This is the air conditioning that will be better than you. It's even more costly, because after the window to open the pipeline to open the car, the resistance inside the car will increase at the same time, and the consumed power will be higher than the opening of the air.

G(H) series pump is a single-stage, single-suction cantilever Horizontal Centrifugal Slurry Pump adopt a single casing structure connected by means of clamp bands. Due to the impeller flow channel spacious, through slurry particle diameter is large, the cavitation performance is good, it can be used as Ball Mill Discharge Slurry Pump with the advantages of light weight, strong resistance to abrasion. This series of pumps is also suitable for delivering slurries in mining, explosive-sludge in metal melting, dredging in dredger , land reclamation,shield tunneling and other fields. Type GH are of high-head ones. 

Product Feature

1. Excellent hydraulic performance, high efficient and low wear rate.

2. Expeller seal, packing seal or the mechanical seal to ensure no slurry leakage.

3. Smooth flow channel, good anti-blocking performance.

4. With special treatment, the G(H) series ball mill discharge Slurry Pump can be operated at the corrosion working conditions like seawater ash ,seawater and salt spray.

G(H) Series Ball Mill Discharge Slurry Pump

G(H) Series Ball Mill Discharge Slurry Pump,Ball Mill Discharge Slurry Pump,Ball Mill Slurry Pump,Grinding Ball Mill,G(H) Series Ball Mill Discharge Pump

Shijiazhuang Soarho Machinary Co.,Ltd , https://www.xhslurrypump.com