Vehicle Pit Parking Lift Four Post Car Garage Parking Equipment

Pit Four Post Parking Lift 

FEATURES:
-New commercial grade design;
-Galvanized platform with wave plate;
-Dual hydraulic lifting cylinders with chains;
-Additional wire ropes anti-fall protection system;
-Hydraulic power pack and control panel;
-Min 1925mm pit depth is needed;
-No wall needed for supporting;
-2500kg capacity is both for cars&suvs;
-Middle post sharing feature;
-Electric key switch;
-Automatic shut-off once operator release the key switch;
-Balance chain synchronization;
-Hydraulic overload protection.

SPECIFICATIONS:
 

DESCRIPTIONS:
1.This Series products are 100% cut by Laser and more than 60% welded by robot;
2.Consumer product level finishing - We have the biggest and best powder coating line within the region ;
3.Most reliable safety - the equipment is built under the CE code and some functions to ensure safety;
4.Professional packing & delivery team - to ensure the customers get the product damage free and unload easily.
5.Experience & life long support -Many years' exporting experience to solve all the possible difficulties that you might face. Life long support would be provided to you free of cost during any such difficulty.
6.Fast and easy installation - With most of the parts pre-installed in the factory, it is very simple on install on site.

CONTACTS:
Attn:Jane Liu
Mob:0086-15712786732
QINGDAO MUTRADE CO.,LTD
WE PLAN,DESIGN,MANUFACTURE AND INSTALL!!! Pit Four Post Parking Lift 

FEATURES:
-New commercial grade design;
-Galvanized platform with wave plate;
-Dual hydraulic lifting cylinders with chains;
-Additional wire ropes anti-fall protection system;
-Hydraulic power pack and control panel;
-Min 1925mm pit depth is needed;
-No wall needed for supporting;
-2500kg capacity is both for cars&suvs;
-Middle post sharing feature;
-Electric key switch;
-Automatic shut-off once operator release the key switch;
-Balance chain synchronization;
-Hydraulic overload protection.

SPECIFICATIONS:
 

DESCRIPTIONS:
1.This Series products are 100% cut by Laser and more than 60% welded by robot;
2.Consumer product level finishing - We have the biggest and best powder coating line within the region ;
3.Most reliable safety - the equipment is built under the CE code and some functions to ensure safety;
4.Professional packing & delivery team - to ensure the customers get the product damage free and unload easily.
5.Experience & life long support -Many years' exporting experience to solve all the possible difficulties that you might face. Life long support would be provided to you free of cost during any such difficulty.
6.Fast and easy installation - With most of the parts pre-installed in the factory, it is very simple on install on site.

CONTACTS:
Attn:Jane Liu
Mob:0086-15712786732
QINGDAO MUTRADE CO.,LTD
WE PLAN,DESIGN,MANUFACTURE AND INSTALL!!!

Pressure Vessel Plate

Pressure vessel and boiler quality steel are commonly found throughout the oil industry (including inshore and offshore), the petrochemical industry and the gas production industry. The companies in these industries set the highest demands in terms of quality, testing and conditions of supply, and we have all the necessary expertise to meet these demands.

In recognition of the increasing need for pressure vessel Steel Plate to demonstrate HIC Resistant properties. Our product is also particularly suited for pressure equipment where wet H2S corrosion can be a problem.

Pressure vessel steel plate covers a range of steel grades that are designed for use in pressure vessel, boilers, heat exchanges and any other vessel that contains a gas or liquid at high pressures.

Familiar examples include gas cylinders for cooking and for welding, oxygen cylinders for diving and many of the large metallic tanks that you see in an oil refinery or chemical plant.

There is a huge range of different chemicals and liquid that that stored and processed under pressure. These range from relatively benign substances such as milk and palm oil to crude oil and natural gas and their distillates to highly lethal acids and chemicals such as methyl isocyanate. So of these processes need the gas or liquid to be very hot, whilst others contain it at very low temperatures. As a result there is a wide variety of different pressure vessel steel grades that meet the different use cases.

In general these can be divided into three groups. There is a group of carbon steel pressure vessel grades. These are standard steels and can cope with many applications where there is low corrosion and low heat. As heat and corrosion have more effect on the steel plates chromium, molybdenum and nickel are added to provide additional resistance.

The manufacture of pressure vessels is tightly regulated as a result of the risks involved and as a consequence the materials that can be used in vessels is also tightly specified. The most common specifications for pressure vessel steels are the EN10028 standards – which are European in origin – and the the ASME/ASTM standards which are from the US.

Our strength is in the very high specification pressure vessel steel plate used in the oil and gas industry and specifically in steel plate resistant to Hydrogen Induced Cracking (HIC).

Pressure vessel steel plate,Vessel steel plate,Boiler steel plate,A516 steel plate

Shandong Guanzhou Iron and Steel Group Co., Ltd. , https://www.guanzhouiron.com