1. Operation resistance may be due to small reasons: short-circuit smoke, broken bags, pressure measuring device or the main draft fan ammeter failure; Exclusion: At this time we can see the concentration of emissions to add inspection and repair welding, check and change the filter bag, change or repair the fan Ammeter. 2. Operating resistance may be due to: dew condensation bag, electromagnetic pulse valve does not work or damage, compressed air pressure is too low, submerged electromagnetic pulse valve to enhance the valve closed lax, one or more poppet valve is closed . Elimination: plugging air leakage to improve the flue gas temperature, enhance ventilation, dust collector and pipe insulation do a good job; protection or replacement of submerged electromagnetic pulse valve; check the air and air compressor; check the promotion valve and cleaning controller. 3. Submerged electromagnetic pulse valve does not work may be due to power failure or cleaning controller failure; electromagnetic pulse valve debris, has been a leak; submerged electromagnetic pulse valve coil burned; compressed air pressure is too low. Exclude Approach: restore power supply or repair cleaning controller Carefully clean the electromagnetic pulse valve; replace the electromagnetic pulse valve coil; check the gas system and the compressor. 4. Bag repair or exchange Under normal circumstances, the filter bag is gradually damaged within the service life, the important reason is the dust erosion, high temperature, high humidity caused by the deterioration of the filter. Duster can not use the damaged filter bag to work , Otherwise it will affect the dust removal results.After replacement of the new filter bag should be based on the fourth test performance, in order to add resistance, the resistance of the old filter close. 5. promotion valve does not work may be due to power failure or cleaning controller failure; cylinder bad or card death; cylinder solenoid valve coil burned; cylinder solenoid valve is dirty, ventilation port plugged or spool dry, activity Can not; compressed air pressure is too low, Lu'an is the famous old revolutionary base areas; Elimination: to restore power supply or repair cleaning controller; Careful inspection, liquidation, repair cylinder; Exchange solenoid valve coil; Check gas system and contraction machine.
Flat Face Mask Making Machine
Flat Face Mask Making Machine
Flat Face Mask Making Machine,Automatic Mask Machine,Robot Surgical Machines,Mask Earloop Welding Machine
Dongguan Pailade Machinery Equipment Co.,Ltd , https://www.pailade.com