Elongation at Break: 300% (Min)
Tear Resistance: 70n/mm (Min)
Accessories: Frontal Frame, Chain, Bolt
Transport Package: Pallet or as Customerâ€²s Requirements
HS Code: 4016940000
Contact person: Grady Wang
Marine rubber fender is an elastic buffer device, which is widely used in the side of vessel or wharf. Its function is to protect the boats from being damaged by slowing down the impact force between vessel and wharf or vessel and vessel in process of ships dock.
|D Type Fender
||W Type Fender
|Note: Except standard type, we can also design and customize fender as client's special requirementsÂ |
3.Performance Table of Rubber Material
Our fender are made of imported high quality natural rubber and other synthetic rubber such as SBR based compounds to satisfy various performance requirements. In addition, we can apply the special rubber according to the customer's request. The main performance index shows below.
||Elongation at break
||Compression Set (70ÂºC,22h,20%)
||Hardness (Shore A)
||80Â±5 Shore A
||Ozone Resistance (50pphm at 40ÂºC at 20% strain ar for 96 hours)
||No visible cracking
||Â Abrasion resistance
||Bond strength of steel to rubber method B
||Hot Air aging
|Variation Ratio of tensile strength
|Variation Ratio of elongation at break
Â Front Frame &Â UHMW-PE Pads
Front panels are complex steel fabrications designed for working with cell fender, cone fender, element rubber fenders and other types. It is necessary part of fender system as they can distribute the reaction force form the rubber fender into the hull of vessels.
UHMW-PE pads, generally fixed to front panels, can provide the best combination of price and durability to the whole fender system. The pads are characterized by higher abrasion resistance and low-friction surface, excellent durability and high toughness. It efficiently protects the painting of vessels from damages caused by friction.
Steel chains are used to fasten cylindrical fenders, pneumatic fenders and other types of fenders for providing excellent control of fenders such as the deflection and shear strength during impact. Normally, there are two main types of steel chain systems are commonly used for fender installation as shown in the picture.
Anchor Bolts and Nutsanchor bolts and nuts in accordance with rubber fenders you bought can also be supplied. They are necessaries for installation of cell rubber fender, DÂ fenders, cell fenders, element rubber fender and various types of fenders.
Goose-neck Camper Trailer
Camper Trailer,Horse Trailer To Camper,Goos-Eneck Camper Trailer,Camper Horse Trailer Combo
shandong Herui Mechanical Co., Ltd , https://www.heruihorsefloat.com