Marine Foam Filled Fenders / EVA Fenders/ Ship-Ship Protective Accessories

Trademark: Evergreen Maritime
Origin: Shandong, China

Marine Foam Filled Fenders / EVA Fenders/ Ship-Ship Protective Accessories
 

EVA Foam Fender with Thicken PU Skin

1.Construction

EVA Foam Fender with Thicken PU Skin
2.Specification
 

Specification Performance(at 60% pressure) Weight
Diameter Length Reaction(KN) Energy(KN.M) Body(kg) CTN(kg)
300 500 19 1.8 6  
400 800 40 7 17  
500 1000 48 9 33  
600 1000 58 12 48  
700 1500 133 26 96  
1000 1500 173 47 108 197
1000 2000 254 68 263 171
1200 2000 280 91 378 248
1350 2500 418 152 600 298
1500 2000 488 198 580 310
1500 3000 578 232 890 490
1700 3000 618 282 1140 510
2000 3500 845 454 1845 890
2000 4000 1005 540 2100 1000
2500 4000 1197 818 3297 1180
2500 5500 1666 1128 3866 1200
3000 5000 1810 1460 4878 2388
3000 6000 2295 1851 5849 2690
3300 6500 2528 2133 7668 2889
3500 6000 2777 2333 7698 3000


3.Application

EVA Foam Fender with Thicken PU Skin

4.Packing&Delivery

EVA Foam Fender with Thicken PU Skin
Marine Foam Filled Fenders / EVA Fenders/ Ship-Ship Protective Accessories
Marine Foam Filled Fenders / EVA Fenders/ Ship-Ship Protective Accessories

Brief introduction and editing of dust remover
Bag Filter [1] is a dry dust filter. After a period of use of filter material, due to the effect of sieve filtration, collision, retention, diffusion, static electricity and so on, the surface area of the filter bag is gathered in a layer of dust. This layer of dust is called the initial layer. In the course of the movement, the primary layer becomes the main filter layer of the filter material, and the larger filter material of the net hole can also get higher filtration depending on the effect of the initial layer. Efficiency. With the accumulation of dust on the surface of the filter material, the efficiency and resistance of the Dust Collector all increase correspondingly. When the pressure difference on both sides of the filter material is very large, some fine particles that have been attached to the filter material will be squeezed past to reduce the efficiency of the dust collector. In addition, the high resistance of the dust collector will reduce the air volume of the dust removal system significantly. Therefore, when the resistance of the dust collector reaches a certain value, the ash should be cleaned in time. When cleaning, the primary layer should not be destroyed, so that the efficiency will be reduced.
  

Flat Bag Dust Collector

Flat Bag Dust Collector,Portable Dust Collector,Washable Dust Collector,Mobile Welding Smoke Collector

Botou Youjian Environmental Protection Equipment Co. LTD. , http://www.btdustmachine.com