DC500 Low Profile Cable Drum Jack

DC500 Low Profile cable drum jack





Description of DC500 Low Profile cable drum jack
Equipped with the Bung Wrench Handle to reduce risks to workers, OUR MACHINE drum caddy allows you to pull or push to move your drum around with the handle. Don't risk catching your fingers between the drum and other objects. You then pull from the bottom of the drum to move it around, with weight far more evenly distributed on all dolly wheels. You have greater control, and significantly reduce risk of tipping. Drum dollies with handles are far more stable because you apply even force below the drum's center of gravity.

Description of DC500 Low Profile cable drum jack

• High strength steel construction offers long lasting rugged use
• Removable pivoting handle can be used as a drum tool
• Beveled front edge makes loading drum simple
• Additional platform supports can handle smaller diameter drums

Technical Data of DC500 Low Profile cable drum jack
 
Application of DC500 Low Profile cable drum jack
With the Bung Wrench Handle to reduce risks to workers to allow you to pull or push to move your drum around, OUR MACHINE Drum Caddy DC500 is widely used to move 30 or 55 gallon steel, plastic or fiber drums in the field of chemical plants and food plants for transferring, charging and compounding materials of fluids, such as dyes, paintings, adhesives, petrol, edible oils, etc.

Related Drum Handler Products




Certificates





Customer Visiting
Wuxi OUR Machine team adhere to implement quality to every detail by strictly arranging production and inspection. We have established good cooperative relations with over 100 leading enterprises in China, and nearly one hundred merchants in more than 20 countries and areas. Founded in 2007, Wuxi OUR MACHINE, specializes in the customized designing, manufacturing and supply of coating machine, cleaning machine, drum trucks and drum grabbers. As an ISO14001:2015 environmental management system and ISO 9001:2015 quality management system certificated company, Wuxi OUR Machine team adhere to implement quality to every detail by strictly arranging production and inspection.
    



Contact us
Wuxi OUR MACHINE will assure that our high quality products and best service is your first choice and favorite supplier in China. Sincerely welcome cooperation from both home and abroad!


  DC500 Low Profile cable drum jack





Description of DC500 Low Profile cable drum jack
Equipped with the Bung Wrench Handle to reduce risks to workers, OUR MACHINE drum caddy allows you to pull or push to move your drum around with the handle. Don't risk catching your fingers between the drum and other objects. You then pull from the bottom of the drum to move it around, with weight far more evenly distributed on all dolly wheels. You have greater control, and significantly reduce risk of tipping. Drum dollies with handles are far more stable because you apply even force below the drum's center of gravity.

Description of DC500 Low Profile cable drum jack

• High strength steel construction offers long lasting rugged use
• Removable pivoting handle can be used as a drum tool
• Beveled front edge makes loading drum simple
• Additional platform supports can handle smaller diameter drums

Technical Data of DC500 Low Profile cable drum jack
 
Application of DC500 Low Profile cable drum jack
With the Bung Wrench Handle to reduce risks to workers to allow you to pull or push to move your drum around, OUR MACHINE Drum Caddy DC500 is widely used to move 30 or 55 gallon steel, plastic or fiber drums in the field of chemical plants and food plants for transferring, charging and compounding materials of fluids, such as dyes, paintings, adhesives, petrol, edible oils, etc.

Related Drum Handler Products




Certificates





Customer Visiting
Wuxi OUR Machine team adhere to implement quality to every detail by strictly arranging production and inspection. We have established good cooperative relations with over 100 leading enterprises in China, and nearly one hundred merchants in more than 20 countries and areas. Founded in 2007, Wuxi OUR MACHINE, specializes in the customized designing, manufacturing and supply of coating machine, cleaning machine, drum trucks and drum grabbers. As an ISO14001:2015 environmental management system and ISO 9001:2015 quality management system certificated company, Wuxi OUR Machine team adhere to implement quality to every detail by strictly arranging production and inspection.
    



Contact us
Wuxi OUR MACHINE will assure that our high quality products and best service is your first choice and favorite supplier in China. Sincerely welcome cooperation from both home and abroad!


 

QUANTUM Bucket Elevators have successfully been installed in a wide range of applications and capacities. From process equipment, handling a few kg /hr to over 2000 t/hr with a vast range of materials. Whether your application requires a heavy-duty high capacity machine or an industrial process elevator for your factory.

We have a wealth of experience in designing the correct Bucket Elevator for your application and have a standard range of elevators, which can be specifically designed for, more specialised applications.

Our elevators have conveyed high temperature, high wear, abrasive, large lumpy, sticky non-flowing materials, as well as free flowing powders and granules. We supply a standard range of twin chain and belt elevators single or twin bucket design for high capacity applications such as grain, minerals and ore. The selection of the elevator depends on the material characteristics and IBS will be able to advise you and select the elevator most suited to your material and your application.

QUANTUM Standard Range of Elevators
• Gravity elevators
• Positive discharge elevators
• Central discharge slow speed elevators
• Centrifugal elevators

Gravity Type Bucket Elevator
Quantum supply gravity discharge elevators and positive discharge elevators, supplied as close bucket discharge type, central discharge type, or Idler wheel discharge.
Generally a slow speed design gravity bucket elevator is primarily installed for elevating large lumpy & abrasive material. Our standard units are usually chain driven, either friction drive or toothed sprocket.
These elevators offer reliability with minimum wear & a positive discharge emptying of the bucket.

Centrifugal Type Bucket Elevator
Quantum standard range of centrifugal elevators are the most common type of elevator installed to most industries supplied in both belt type or chain type depending on material characteristic and the capacity being elevated and in some case the feeding method of the elevator.
Conveying type
• Segmented tooth sprocket chain type, twin chain or single dropped forged link chain
• Friction chain type elevators, European rolled chain
• Belt elevator. Using rubber belt or 100% polyester solid woven belt, nylon and steel woven belt Typical Construction
• We supply Single leg or Double leg elevators
• Lagged Head Pulley
• Slatted return Pulley for sticky materials
• Segmented removable sprockets for chain elevators
• Segmented and removable friction pulleys for friction drive elevators
• Fabricated boot and head section assemblies
• Fabricated 3.0m long nominal casings c/w with self-supporting frame and lateral support frames
• Dust tight sealed flanges
• Screw or counterweight tail end take up
Whether the elevator is best suited for toothed sprocket design, friction wheel on conventional belt, IBS will be able to assist with correct selection for the most reliable, maintenance free and cost effective machine to suit your material characteristic and conveying capacity for your particular application.

Types of Buckets readily available
IBS Supply a range of standard off the shelf buckets in a variety of sizes and materials.
Selection of bucket type will depend on material, material characteristics and application. Typical IBS buckets would be plastic-nylon or polyurethane and can be provide FRAS, mild steel fabricated or pressed, stainless steel fabricated or pressed and wear tips for abrasive materials.

Safety and maintenance
• Our equipment is supplied mandatory with anti-roll back device in full load condition
• All inspection doors are fitted with safety limit 
• Safety factor of minimum 12: 1 to rated chain pull to installed chain or belt pull under full load stall conditions

For some materials and specific applications, Quantum will design in accordance with Australian standards, suitable explosion venting and will design the structure of the elevator to suit the required application. Typical material that requires this consideration would be sugar, flour, grain and coal.

Standard features for all our bucket elevators

• Qty2 1000mm long inspection doors in conveyor leg and return leg in twin leg elevators for easy inspection of belt or chain and replacement of buckets. Inspection hatch will be provided with bolted mesh screen and safety limit switch

• Qty 2 inspection doors in head section, fitted with safety limit switch
• Fully removable split head top section.
• Clean out and inspection doors in Boot section. Self-cleaning boot section optional.
• Under speed sensor and flag disc

• Belt tracking sensor or switch for belt Bucket Elevators

Design Criteria for IBS Bucket Elevators
• All our equipment is designed to meet Australian Standards
• Selection of correct conveying velocity and material trajectory for centrifugal elevators is critical to the successful operation of a bucket elevator
• Standard wear plates on boot in-feed and head chute discharge.
• Designed to operate no more than 70% water level of selected bucket at normal operation.
• Installed power capable of full load start up under full bucket surge capacity.
• Our bucket elevators are designed for dust tight design, with suitable dust extraction points
• All our bucket elevators are designed to be self-supporting and are provided with lateral support bracing at approx. 10m centres

Replacement parts service
We can provide a range of standard bucket elevator parts using our standard head and Tail Pulley assemblies, conveyor belting, elevator butt straps, conveyor bolts and fittings, belt-splicing fittings.

Coupled with our range of standard steel and plastic buckets, elevator chain and fittings, belt tracking switches and sensors we will keep your business moving--

After sales support
Quantum can provide a customised service contract using experience technicians with many years` experience in servicing and troubleshooting bucket elevators in most states. This service ensures that your equipment is functional to its optimum capabilities and reduces down time parts replacement and potential damage.Our technicians have standard customer maintenance, checking and reporting procedure.

Bucket Elevator

Bucket Elevator,Bucket Conveyor,Elevator Conveyor,Vertical Conveying Elevator

Quantum Conveying Systems Yangzhou Co.,Ltd. , https://www.quantum-sino.com