What are the working characteristics of the overflow ball mill and what is the product operation?

When the material is fed from the ore feeder through the feed pipe and the slurry surface in the cylinder is higher than the lowest busbar level of the inner diameter of the discharge pipe, the ground material can be discharged from the discharge pipe.

Due to the manufacture, the end of the discharge pipe in the hollow journal of the discharge end cap is flared, and an annular retaining ring is usually also installed at the root of the hollow shaft, so that the slurry leaking from the bolt hole of the end cap can be prevented. Flow into the bearing. At the same time, a spiral is cast in the discharge pipe, and the direction of the spiral is opposite to that of the mill, thereby preventing the steel ball and the ore block from being discharged out of the machine with the slurry. However, the unit has a low volume production capacity per unit volume and is prone to over-grinding.

Due to the long grinding time of the machine, the ore can be fully ground in the machine and the residence time is longer, so the grinding product is finer. Therefore, the grinding machine is usually used as a stage grinding and is suitable for concentrate. By re-grinding, a qualified product with a finer particle size can be obtained.

1. Precise positioning
Optical Fiber Laser Welding Machine is equipped with red point, which is convenient to observe, and can precisely locate by spot in micro-welding.
2. Uniform weld spot
The spot energy distribution of optical fiber laser welding machine is uniform, and it has the best spot needed for welding characteristics.
3. Suitable for all kinds of weld's screams
Fiber laser welding machine adapts to all kinds of complex welds, spot welding of various devices, and welding seams of thin plates within 3mm. It has fast welding speed, large depth and small deformation.
4. Batch & Mass Production
Optical fiber laser welding machine can customize special automatic fixture to realize mass production of products.
5. Corrosion Resistance and High Temperature Resistance
Fiber laser welding machine uses ceramic concentrator, which can be welded at room temperature under special conditions, such as vacuum or through glass materials, and has simple equipment, corrosion resistance and high temperature.

Fiber Laser Welding Machine

Welding Machine For Carborn Steel,Laser Welding Machine For Steel,Laser Welding Machine Aluminum,Automatic Laser Welding Machine

Jinan Vmade CNC Machine Co.,Ltd , https://www.vmadecnc.com