Open Style Vacuum Auto Loader

Model NO.: SAL-U1HP
Motor Power(kw): 1~10
Installation Slope: 5
Chute size(mm): 940*530*380
Overall Dimension: 1000*400*500
Feed Capacity: 300kg/H
Trademark: SINCERE
Transport Package: Wooden Box
Origin: China
HS Code: 8428399000
1)Stainless hopper receiver to eliminate contamination. 
2) Microprocessor controller for ease of use and has multipile alarm indicators. 
3) Motor overload protector ensure long motor life.
4) Audible material shortage alarm device. 
5) Filter designed for easy cleaning and has filter status checking window for easier monitor of filter condition. 
6) Both vacuum hopper and photosensor hoper can be directly mounted on moulding macchine's feed port. The above mentioned loaders adopt standard stainless steel mesh 
7) Cyclone separator can reduce filter clean frequency when used for dusty regrind materials. 
8) Proportional valve for mixing virgin and regrind materials, or for material instant recycling. 


 
Model Motor power Feed Height Feed capacity Static air Press Hopper Capacity tube Diameter. Demension (cm)
Kw /HP M Kg / H pa L mm loader hopper
SAL-U1HP 0.75/1 4 300 1600  6 1.5 100*40*50 94*53*38
SAL-U2HP 1.5/2 4 400 2000  12 1.5 100*40*50 132*73*47
SAL-U3.5HP 2.4/3.5 6 800 2500  24 2 138*490*590 150*78*50
SAL-U5HP 3.75/5 6 1000 3000  24 2 138*490*590 150*78*50
SAL-U7.5HP 5.5/7.5 6 1200 3000  36 2.5 173*58.5*67 104*89*63
SAL-U10HP 7.5/10 8 1500 4000  36 2.5 173*58.5*67 104*59*43
SAL-U15HP 10/ 15 10 2000 5000  48 3 173*58.5*67 104*59*43
Notes Type of Induction and Carbon on motor is optional.
The technical parameter is only for reference, there is no additional notice giving for any alterations

   Heavy oil burners are specially designed for waste tyre pyrolysis machines, 

which burns with the oil generated from system itself.

  It is not only easy to operate but also quite cheap.




heavy oil burners for pyrolysis machine heavy oil burners for pyrolysis machine (1)heavy oil burners for pyrolysis machine (2)heavy oil burners for pyrolysis machine (3)

  the final products will be 40%-45%tyre oil(fuel oil), carbon blacks and  35% carbon blacks, and 10% steels  and another 5-10% recycling gas(CH4-C4H10).

 

the main process is that by heating the reactor directly, tyres will be pyrolysised into oil gas;

condensers or cooling pipes will cool the gas down into liquid oil with the help of recycling water;

then the rest gas which could not be cooled down into liquid oil will be recycled into reactor heating system; after oil gas coming out completely, stop heating the reactor, and cool down reactor below 70 degrees; then can open the door and discharge carbon black automatically...

there are models with capacities from 5tons to 20tons per batch

LN-2200-6000 capacity of 5-6ton 

LN-2200-6600 capacity of 7-8ton 

LN-2200-8000 capacity of 9-10ton 

LN-2600-6600 capacity of 10-12ton 

LN-2600-8000 capacity of 12-14ton 

LN-2800-6000 capacity of 10-12ton 

LN-2800-6600 capacity of 12-14ton 

LN-2800-8000 capacity of 15-20ton 

if cut into smaller pieces, it could process more.


Heavy Oil Burners For Waste Pyrolysis Machines

Boiler Equipment Heavy Oil Burner,Heavy Fuel Oil Burner,Fuel Oil Domestic Burners,Fragrance Oil Burners

Henan Lanning Technology Co., Ltd , https://www.lanningrecycling.com