Nanjing Haisi 3D Printer Filament Extruder

Model NO.: HS-35, HS-45, HS-65
Engagement System: Non-Intermeshing
Screw Channel Structure: Deep Screw
Exhaust: Don′t Exhaust
Automation: Automatic
Computerized: Computerized
Brand: Nanjing Haisi
Material: ABS PLA
Capacity: 0.5~1kg/H
Tolerance: +/-0.05mm
Filament Diameter: 1.75mm or 3mm
Screw Element: Segmental
Screw Material: High Speed Tool Steel W6mo5CRV2
Color: as Order
Delivery Time: 60days
Trademark: Nanjing Haisi
Transport Package: Wooden Cases
Specification: CE, ISO, TUV, SGS
Origin: Nanjing Jiangsu
HS Code: 8477209000
Model NO.: HS-35, HS-45, HS-65
Engagement System: Non-Intermeshing
Screw Channel Structure: Deep Screw
Exhaust: Don′t Exhaust
Automation: Automatic
Computerized: Computerized
Brand: Nanjing Haisi
Material: ABS PLA
Capacity: 0.5~1kg/H
Tolerance: +/-0.05mm
Filament Diameter: 1.75mm or 3mm
Screw Element: Segmental
Screw Material: High Speed Tool Steel W6mo5CRV2
Color: as Order
Delivery Time: 60days
Trademark: Nanjing Haisi
Transport Package: Wooden Cases
Specification: CE, ISO, TUV, SGS
Origin: Nanjing Jiangsu
HS Code: 8477209000
3D Printer Filament Extruder

1.Parameter Table
 

Twin Screw Extruder Technical Data
Series Screw Diameter
D(mm)
Screw Length(mm) L/D Screw Rater
N(r/min)
Motor Power
P(kw)
Torque
T(N.m)
Capacity
Q(kg/h)

TSE-52B
51.5 210 32-64 600 55 438 225-250
TSE-65B 62.4 240 32-64 600 90 716 200-300
TSE-75B 71 290 32-64 600 132 1050 350-550
TSE-95B 93 360 32-64 600 315 2506 800-1200

1.Converts either a variety of plastic Pellets (ABS and PLA tested only) to either 1.75mm or 3mm filament (Both dies included)
2.Extrudes at 200-240 Celsius  through the hot end, constructed of copper and high quality aluminum for proper heat dissipatio
3.Filament spools on floor (on or in a box) for continuous operation (this unit is tried and tested for multiple 48 hour runs, with no problems in the final stages, and will run for days with no supervision with a hopper extension)
4.Filament tolerances 1.70mm (+/-0.05mm), 2.95mm (+/-0.05mm)
5.Fully assembled and ready to make filament right out of the box (not a kit)
6.Extrudes at 0.5kg for one hour ~1kg for one hour(Depending on extrusion temp. and plastic)
7.Runs on 110-120v household electric
8.High Quality step by step instruction manual included as well as our support by phone or email 


2.Applicable Scope:

Used for continuous automatic quantitative packing of such as plastic granules, wheat, corn, rice, malt, oil plants, seed, chemical fertilizer, feedstock , bean residue and so on.


Nanjing Haisi 3D Printer Filament Extruder

3.Functions and Features :

1.Integrate feeding material, weighting, bag clipping, bag packing, conveying and sealing.
2.Automatic pack reduction and automatic calibration during the weighing each time.
3.Have functions such as long-range controlling and trouble diagnosing, repairing , ultra difference alarms and so on.
4.Adopt gravity feeding method internally inside the package to ensure high metering accuracy and fast packing speed.
5.24-bit fast A/D converter and intelligent digital filtering technology, strong anti-interference, fast and stable.
6.Weight meter adopts aluminum alloy enclosure, with high anti-interference performance and simple operation.
7.Double CPU construction, with power down data protection inside the unit.
8.Full enclosure design, negative pressure operation inside the unit, without dust escape, with clean environment.

Nanjing Haisi 3D Printer Filament Extruder

1. Electric Control System

Frame structure control cabinet
Imported electrical elements
Imported temperature control system
Imported driving system
Interlock and multi-protection
Adopting imported PLC (OMRON or SIMES ) to achieve optimized process control.Stronger function, steady performance and much higher accuracy.
It can be also accomplished full-set link-lock protection,trouble safeguard, fault alarm cluing and so on
Operation interface on touching screen is visual and marked, which is brief and easy to use.

2.The Gearbox

New-style project of parallel three-axises driving makes the convey axis,convey chain,decelerate and the torque assignment get together,which keeo it compact,and the key bearings are imported.
The select material of drive components is dainty. Including super intension alloy cementiteing steel,cementiting and quenching ,gear grinding technics ,strengthening of tooth face.So they can ensure high torque,high precision and low noise.
Soakage and coerce lubrication integrate smoothly.When the hydraulic circuit is over pressed, it alarms

3.Mixing and Feeding System

Nanjing Haisi 3D Printer Filament Extruder


4.The Screw Barrel

Euro-style rectangle barrel,reflux refrigeration is optimized and disposed,which makes temperature difference in C areas smaller
According to the material and special techinics demands,the material of cylinder can use high quality nitrided steel,corrosion proof or antifriction with corresponding process
The screw material is made of high tool steel 38CrMoALA or W6Mo5Cr4V2 by special heat- treament

5.Pelletizer

Nanjing Haisi 3D Printer Filament Extruder

4.Ce and ISO 9001 Certificates

Nanjing Haisi 3D Printer Filament Extruder

5.Shippment:
Wooded cases or customized

6.Service Stystem
 Before-sale:
*Introduce products in detail

*Recommend suitable solution
*Offer test

During Manufacturing:
*Provide layout and engineering conditions
*Offer screw plan and related documents
*Inform the project processing status
*Insure the product designed in accordance with technical document

After-sale:
*Provide installation, commissioning and training
*Offer spare parts
*Provide necessary techinical support and update infoamation

Nanjing Haisi 3D Printer Filament Extruder

FAQ

1. Q: How about Haisi? 

    R: Nanjing Haisi Extrusion Extrusion Equipment Co., Ltd. is a High-Tech company. Our firm is composed of a strong team which has substantial experience in R&D, manufacture, technique and service, and has specialized in extruder industry for ten years, leading screw barrel manufacturer in China.

2. Q: What's Haisi capacity?

    R: Our company is in strict accordance with CE and ISO9001 quality certification system. there are over 200 models of extruders and spare parts.

3. Q: What's the delivery time?

    R: For regular size, we have finished stock and semi-finished stock, 2 weeks max are enough for customized, normally 3~4 weeks.

4. Q: Where is Haisi factory and how to reach there?

    R: At Lishui, Nanjing, Jiangsu Province. If you want to visit us, we can pick you up in the airpor or train station.

5. Q: How to contact with us?

    R: Plz reply to me directly if you have any question.

3D Printer Filament Extruder

1.Parameter Table
 

Twin Screw Extruder Technical Data
Series Screw Diameter
D(mm)
Screw Length(mm) L/D Screw Rater
N(r/min)
Motor Power
P(kw)
Torque
T(N.m)
Capacity
Q(kg/h)

TSE-52B
51.5 210 32-64 600 55 438 225-250
TSE-65B 62.4 240 32-64 600 90 716 200-300
TSE-75B 71 290 32-64 600 132 1050 350-550
TSE-95B 93 360 32-64 600 315 2506 800-1200

1.Converts either a variety of plastic Pellets (ABS and PLA tested only) to either 1.75mm or 3mm filament (Both dies included)
2.Extrudes at 200-240 Celsius  through the hot end, constructed of copper and high quality aluminum for proper heat dissipatio
3.Filament spools on floor (on or in a box) for continuous operation (this unit is tried and tested for multiple 48 hour runs, with no problems in the final stages, and will run for days with no supervision with a hopper extension)
4.Filament tolerances 1.70mm (+/-0.05mm), 2.95mm (+/-0.05mm)
5.Fully assembled and ready to make filament right out of the box (not a kit)
6.Extrudes at 0.5kg for one hour ~1kg for one hour(Depending on extrusion temp. and plastic)
7.Runs on 110-120v household electric
8.High Quality step by step instruction manual included as well as our support by phone or email 


2.Applicable Scope:

Used for continuous automatic quantitative packing of such as plastic granules, wheat, corn, rice, malt, oil plants, seed, chemical fertilizer, feedstock , bean residue and so on.


Nanjing Haisi 3D Printer Filament Extruder

3.Functions and Features :

1.Integrate feeding material, weighting, bag clipping, bag packing, conveying and sealing.
2.Automatic pack reduction and automatic calibration during the weighing each time.
3.Have functions such as long-range controlling and trouble diagnosing, repairing , ultra difference alarms and so on.
4.Adopt gravity feeding method internally inside the package to ensure high metering accuracy and fast packing speed.
5.24-bit fast A/D converter and intelligent digital filtering technology, strong anti-interference, fast and stable.
6.Weight meter adopts aluminum alloy enclosure, with high anti-interference performance and simple operation.
7.Double CPU construction, with power down data protection inside the unit.
8.Full enclosure design, negative pressure operation inside the unit, without dust escape, with clean environment.

Nanjing Haisi 3D Printer Filament Extruder

1. Electric Control System

Frame structure control cabinet
Imported electrical elements
Imported temperature control system
Imported driving system
Interlock and multi-protection
Adopting imported PLC (OMRON or SIMES ) to achieve optimized process control.Stronger function, steady performance and much higher accuracy.
It can be also accomplished full-set link-lock protection,trouble safeguard, fault alarm cluing and so on
Operation interface on touching screen is visual and marked, which is brief and easy to use.

2.The Gearbox

New-style project of parallel three-axises driving makes the convey axis,convey chain,decelerate and the torque assignment get together,which keeo it compact,and the key bearings are imported.
The select material of drive components is dainty. Including super intension alloy cementiteing steel,cementiting and quenching ,gear grinding technics ,strengthening of tooth face.So they can ensure high torque,high precision and low noise.
Soakage and coerce lubrication integrate smoothly.When the hydraulic circuit is over pressed, it alarms

3.Mixing and Feeding System

Nanjing Haisi 3D Printer Filament Extruder


4.The Screw Barrel

Euro-style rectangle barrel,reflux refrigeration is optimized and disposed,which makes temperature difference in C areas smaller
According to the material and special techinics demands,the material of cylinder can use high quality nitrided steel,corrosion proof or antifriction with corresponding process
The screw material is made of high tool steel 38CrMoALA or W6Mo5Cr4V2 by special heat- treament

5.Pelletizer

Nanjing Haisi 3D Printer Filament Extruder

4.Ce and ISO 9001 Certificates

Nanjing Haisi 3D Printer Filament Extruder

5.Shippment:
Wooded cases or customized

6.Service Stystem
 Before-sale:
*Introduce products in detail

*Recommend suitable solution
*Offer test

During Manufacturing:
*Provide layout and engineering conditions
*Offer screw plan and related documents
*Inform the project processing status
*Insure the product designed in accordance with technical document

After-sale:
*Provide installation, commissioning and training
*Offer spare parts
*Provide necessary techinical support and update infoamation

Nanjing Haisi 3D Printer Filament Extruder

FAQ

1. Q: How about Haisi? 

    R: Nanjing Haisi Extrusion Extrusion Equipment Co., Ltd. is a High-Tech company. Our firm is composed of a strong team which has substantial experience in R&D, manufacture, technique and service, and has specialized in extruder industry for ten years, leading screw barrel manufacturer in China.

2. Q: What's Haisi capacity?

    R: Our company is in strict accordance with CE and ISO9001 quality certification system. there are over 200 models of extruders and spare parts.

3. Q: What's the delivery time?

    R: For regular size, we have finished stock and semi-finished stock, 2 weeks max are enough for customized, normally 3~4 weeks.

4. Q: Where is Haisi factory and how to reach there?

    R: At Lishui, Nanjing, Jiangsu Province. If you want to visit us, we can pick you up in the airpor or train station.

5. Q: How to contact with us?

    R: Plz reply to me directly if you have any question.

Trichloroethylene Recycling Machine,Calstar® Solvent Recovery Machine Recyclable: washing solvent, acetic acid esters, halogenated hydrocarbons, three ethyl chloride, trichloroethylene, solvent oil, isopropyl alcohol, acetone, butanone and cyclohexanone, days that water, wash water gun, banana water, plate washer water, wash water network, wash water, white oil, hand washing water, diluent, washing water, ink cleaning agent, ethyl acetate, toluene, xylene, toluene three, four toluene, banana water, alcohol, ethanol, butanol, two glycol solvent waste and dirty etc..
Calstar® solvent Recovery Machine using the distillation principle: by heating the evaporation of solvent into a gaseous state, the steam into the cooling system to flow out, so that the recovery of organic solvents. So as to make the waste, dirty, old organic solvent recycling, recycling and reuse. Both can save a lot of procurement costs, but also to reduce the pollution of the environment.
Cleaning Agent Recovery Machine,Recyclable solvent,Recoverable solvent species

Trichloroethylene Recycling Machine

Trichloroethylene Recycling Machine,Trichloroethane lll Recycling Machine

SHENZHEN KUANBAO ENVIRONMENTAL EQUIPMENT CO., LTD , http://www.calstarkb.com