Highway sound barriers are everywhere, but do you know about it?

Road sound barriers have become a common product. Whether you are able to see such products on the viaduct or on both sides of the highway, the road sound barrier should be checked during the installation process. Whether the surrounding environment is suitable for installation, but also check the quality of the Anping sound barrier itself.

It is necessary to deal with their columns first. Generally speaking, it is the key to connecting concrete and insulation panels. Of course, during the installation process, it must be executed according to a series of operational procedures. After the corresponding tool personnel cooperate to clean up some rubbish on the ground, the angle can be adjusted to ensure that it is on a flat ground.

Then, when the road sound barrier is installed, it is necessary to do a fixed job. It is necessary to carry out a series of pouring on the connected place, and the whole column is firm. Generally, you only need to prepare the mortar. Processing can be done, must comply with the relevant regulations, do a series of basic surface trench work in advance to ensure that all are filled.

After all of this is done, the installation of the Anping sound barrier is basically done on the isolation board. Generally, some very good materials are selected. In this case, the material is also very light. It is especially convenient to fix and can be installed in a standardized way.

In addition, Anping Hengai reminds everyone that in the production of highway sound barrier specifications, a series of inspections should be carried out on the design of the drawings. If the requirements are met, they can be processed according to the drawings, and in the process of production. There must be a reasonable test standard.

The tensile strength of the road sound barrier support structure is to be guaranteed at 210 mPa, which can be higher than this strength. The welded joint of the column member must be higher than four mm. The entire surface must be treated by thermoplastic zinc. Thermoplastic The content can not be less than 600 grams per square meter, after which, it can be completely processed by electrostatic spraying, the color is basically green, and their coating must be guaranteed to be in a certain thickness.

Highway sound barrier specifications have their own processing standards in various aspects. Generally, manufacturers must comply with such processing specifications.