Custom 316 Stainless Steel Special Nuts & Fitting

We supply custom metal parts for electornics through metal injection molding process . 

Metal injection molding is an effective way for the high-volume production of small metal parts
( from0.1g to200g ), such as stainless steel parts. The parts with metal injection molding process may be geometrically complex , thin walls and fine details.

The use of metal powders enables a wide variety of ferrous and non ferrous alloys to be used and for the material properties ( hardness , strength , wear resistance, corrosion resistance ) to be close to the wrought metals. And also because the metal is not melted in the MIM process (unlike metal casting and machining process), high temperature alloys can be used without any negative affect on tool life.

Advantages of MIM process

1. Simple & complex geomitries avaialbe
2. Efficient use material then lower the cost
3. Excellent mechanical properties
4. Tailored solutions to meet the flexible design
5. High-efficient volume production  
6. Repeatable use
7. A green way for production

 
Custom parts







Workshop


  We supply custom metal parts for electornics through metal injection molding process . 

Metal injection molding is an effective way for the high-volume production of small metal parts
( from0.1g to200g ), such as stainless steel parts. The parts with metal injection molding process may be geometrically complex , thin walls and fine details.

The use of metal powders enables a wide variety of ferrous and non ferrous alloys to be used and for the material properties ( hardness , strength , wear resistance, corrosion resistance ) to be close to the wrought metals. And also because the metal is not melted in the MIM process (unlike metal casting and machining process), high temperature alloys can be used without any negative affect on tool life.

Advantages of MIM process

1. Simple & complex geomitries avaialbe
2. Efficient use material then lower the cost
3. Excellent mechanical properties
4. Tailored solutions to meet the flexible design
5. High-efficient volume production  
6. Repeatable use
7. A green way for production

 
Custom parts







Workshop


 

Most older motorcycles have a three-position fuel petcock valve (known as a "petrol tap" in the UK) mounted on or nearby the fuel tank to control the supply of gasoline: on, off, and reserve.
The reserve position accesses the bottom portion of the fuel tank. Many older motorcycles lacked a fuel gauge, making reliance on a fuel reserve a relatively common experience. Most now have an automatic, vacuum operated petcock (that may include a prime position which bypasses vacuum operation and allows fuel to flow to the carburetor without the engine turning over).

Vacuum Tap Valve Petcock

Baotian Scooter Petcock,Qingqi Scooter Petcock,Jonway Scooter Petcock

SONORA MOTOR COMPANY , http://www.sonoramotor.com