Vibration Transmitter XH-VSG-2I-A01-B03-C02,XH-VSG-21-A04-B04-C01

Based on the HN500 integrated vibration sensor, a liquid crystal display with backlight is added to display the vibration velocity RMS or vibration displacement peak-to-peak value through the LCD screen, and with a standard 4-20 mA current output, direct connection. DCS, PLC or other equipment truly realizes the “Sensor Ten Monitoring Instrument” type vibration monitoring function. This product is convenient for on-site observation and has excellent performance. It is also very affordable compared to the vibration monitoring instrument. It is an ideal for absolute vibration measurement and monitoring of factory equipment. select.

WIN8600Y, W1N8600Y-A01-B02-C02-D02 integrated vibration transmitter

1 Frequency response: 5~ 1000 Hz

2 Self-vibration frequency: 4.5Hz or 10Hz

3 Measurement range: 0～20mm/s (speed effective value) or 0～200um (displacement peak-to-peak value)

4 signal output: 4 ~ 20mA (± 0.05mA)

5 Output impedance: ≤500Ω

6 Working voltage: DC24V±10%

7 Wiring method: two-wire system

8 Measurement direction: universal

9 Operating environment: Temperature -40 ° C ~ 100 ° C Relative humidity ≤ 90%

10 Dimensions: φ35×70mm

11 Installation thread: M10×1.5 ×10

12 weight: about 300g

Vibration Transmitter XH-VSG-2I-A01-B03-C02,XH-VSG-21-A04-B04-C01



The series integrated low-frequency vibration speed sensor is a seismic vibration speed sensor with a high natural frequency of the mechanical structure, and can pass a set of low-frequency expansion correction circuit, which can reach 0.5 Hz or lower. MLV/S-9 low-frequency vibration sensor not only maintains some characteristics of vibration speed sensor: such as anti-vibration, impact resistance, high stability, and good low-frequency output characteristics, it can directly output vibration displacement signal, that is, amplitude signal. MLV/S-9 integrated low-frequency vibration speed sensor is suitable for vibration monitoring, machine tool accuracy test, seismic monitoring and geological exploration of large hydro-generator units and low-speed rotary machines, vibration analysis of high-rise buildings and structures, dynamic deformation of subgrade and bridges. With vibration test. VS-020 vibration speed sensor



Fault monitoring: monitoring the absolute vibration of the rotating machinery, such as casing vibration, bearing vibration, frame vibration, etc.; monitoring due to rotor imbalance, misalignment, loose parts, rolling bearing damage, gear damage, etc. It has the characteristics of stronger anti-interference ability, higher precision and more reliable use. At the same time, the volume is smaller, the installation and maintenance are more convenient, and can be widely used in fans, pumps, compressors, and the like. The transmitter integrates a variety of measurement circuits and current transmission circuits, which can measure various measured parameters with high precision and convert them into 4~20mA current output of the corresponding range. Can access DCS, PLC and data acquisition systems. It is equipped with a vibration speed sensor to monitor the absolute vibration of the rotating machine, such as bearing vibration, casing vibration, frame vibration and other vibration (speed) values ​​or displacement values.
Vibration Transmitter.SDJ-703 Vibration Transmitter.SDJ-705 Vibration Transmitter Vibration Transducer.ZH2012 Programmable Dual Channel Vibration Monitor (Amplitude, Intensity General); Intrinsically Safe Integrated Vibration Transmitter .RDCZ Series (Intelligent) Type Differential Expansion Monitor Series Shaft Vibration Monitor. RDXZ -2 Series Shaft Vibration Monitor BSQ015A-A02-B01-C01 Vibration Intensity Transmitter

Series shaft vibration monitor. CZJ-B3 series vibration monitoring digital display integrated explosion-proof vibration transmitter

Vibration monitoring and protection instrument. JM-X-3 series intelligent travel monitoring and protection device

Intelligent axial displacement monitoring and protection instrument. JM-X-3Z intelligent differential expansion monitoring and protection instrument series intelligent travel monitoring and protection instrument. JM-C-3 series intelligent speed monitoring and protection instrument wall-mounted anti-speed monitoring and protection instrument. JM-C- 5S speed monitoring and protection device

Series intelligent speed monitoring and protection instrument. JM-C-6C three take two speed monitoring protection instrument vibration transmitter. JM-B-3B2 Watt vibration transmitter

Integrated Watt Vibration Transmitter. JM-B-33 Integrated Shaft Vibration Transmitter

Vibration switch. JM-B-36 vibration transmitter

Vibration switch. JB68 series electric measuring transducer

Ce Support Wood MDF Engraving Cutting CNC Router

1300*3000mm Atc CNC Machine Wood, 4 Axis CNC Router for Furniture Cabinets

1).9 kw HSD ATC air cooling spindle from Italy 

2).11kw DELTA inverter from Taiwan

3).Original Taiwan SYNTEC control system

4).850w Japan YASKAWA servo motor

5).4kw Becker vacuum pump

6).Vacuum and T-slot working table

7).1.5kw new type dust collector.

8).Automatic lubrication system

9).25# HINWIN square linear guide

10).Taiwan TBI ball screw

14).1.4m SYNTEC control box

NC Studio / DSP Handle Controller Wood Engraving Cutting Machine CNC Router 1300mm*2500mm

Applicable industries: The woodworking industry, the advertising industry, sheet metal products  industries batch processing

Furniture:ideally suitable for mass processing cabinet door,wooden door,solid wood furniture,panel wood furniture,windows,tables and chairs,etc;
Advertising: Advertising indentification, sign making, acrylic engraving and cutting, crystal word making, blaster molding, and other advertising materials derivatives making;
Decoration: acrylic, PVC, MDF, artificial stone, plexi-glass,plastic, and copper and aluminum and other soft metal plate engraving and milling cutting;
Well suited for processing panel.insulating materials,plastic,expoxy resin.carbon mixed compound,etc;

·The whole machine tool geometric frame type structure, durable, geometric design mechanics principle and durable.
·Adopting rack gear transmission and high standard linear rail, Z axis use high precision screw ball, which can ensure running speed to be up to 8m/min.
·The Y axis transmission mode for stepping two-way drive, more efficient, simplified carpentry and maintenance of the processing of the maintenance work.
· High-speed brushless frequency conversion water cooling spindle motor, with big sweaty, strong cutting, low noise, high frequency, the long life, etc. 

Eight Heads 3D Wood Carving Woodworking Machine Wood Moulding CNC Router Price

1. It is convenient for the user to fix the materials by clamp and achieve scale production.  

2.  Eight heads Wood Working CNC Router is welded with seamless steel structure and is processed by high temperature tempering treatment and vibrating stress relife to relief residual stress. The stability is excellent, not easy to be   deformed.

3. Eight heads wood working cnc router adopts gantry movement, it can process any kinds of materials freely.

4. X and Y axes adopt rack gear and Hiwin square guiding rail transmission, faster working, higher efficiency and low cost.

5. Z axis adopts imported ball-screw of Germany and imported linear orbit, stable working, high precision and long life time.

6. Well compatibility: CAD/DAM designing software e.g. Type 3/Artcam/Castmate/Wentai etc.

7. Has the function of re-carving after break point and power failure.

8. Has the function of forecasting process time.

9. Adopting advanced DSP system, operated with the handle, convenient operation. Our engraver can completely work off-line and do not take any computer resources.

10. Perfect oil-inject system of the wood working cnc router makes maintenance much easier.

11. Has duct collector. It will clean up the carving residuum and make the operations tidier and more convenient.

12. Adopting water cooling system, it can provide good cooling effect when carving flinty materials.

Wood CNC Router

Wood CNC Router,Wood Atc CNC Router,Mini Wood CNC Router,Wood Working CNC Router

Shandong Sunrise CNC Machine Co., Ltd , https://www.scmcnc.com