RS Series Mini Single Stage Rotary Vane Vacuum Pump
Product Overview
This mini single-stage rotary vane vacuum pump is designed to remove air from sealed containers. It can be used as a standalone unit or serve as a forepump, process pump, or auxiliary pump for booster pumps, diffusion pumps, and molecular pumps. Its compact design makes it ideal for various industrial and laboratory applications.
Key Features
1. Compact size, lightweight, and low noise operation.
2. Equipped with a gas ballast valve for better performance when handling water vapor.
3. Includes an oil anti-suckback device for easier and safer startup.
4. Third-generation improved model, offering enhanced efficiency and reliability.
Applications
These pumps are widely used in electrical vacuum enclosures, vacuum sealing, printing, and vacuum forming. They are also commonly applied in food packaging, scientific research, medical equipment, electronics, chemical processing, and university laboratories.
Company Profile
Founded in 1988 in Zhejiang, the company initially focused on producing SK series vacuum pumps for the pharmaceutical industry.
In 1997, a sales branch was established in Shanghai to expand market reach.
In 1998, the company launched the SK-A and SK-D series, specifically tailored for the plastic industry.
In 2007, the foreign trade department was set up, allowing the company to enter international markets.
Main Products:
Liquid ring vacuum pumps: SK, SK-A, SK-D, 2SK, 2SK-B, 2BEA, etc.
Centrifugal pumps: IZ (BL), etc.
Rotary vane vacuum pumps: 2X, 2XZ-B, VRD, XD, etc.
Certifications:
CE; ISO 9001:2000; ISO 14001:2004;
Â
Installation steps for SANY hydraulic cylinder seals
1. Preparation: Clean the working surface and seals, and check if the seals are damaged or deformed.
2. Apply lubricant: Apply a layer of lubricant to the seal and sealing groove.
3. Install the seal: Place the seal into the sealing groove, ensuring that the seal is fully embedded in the groove.
4. Install O-ring: Install the O-ring above the seal, ensuring that the O-ring is fully inserted into the groove.
5. Install the piston rod: Insert the piston rod into the seal and O-ring, ensuring that the piston rod fits tightly with the seal and O-ring.
6. Install the sealing sleeve: Place the sealing sleeve on the piston rod to ensure that it fits tightly with the piston rod.
7. Tighten the nut: Use the nut to fix the sealing sleeve on the hydraulic cylinder, ensuring that the sealing sleeve is secure.
8. Check the sealing effect: Operate the hydraulic cylinder and check if there is any leakage in the sealing element. If there is any leakage, reinstall the sealing element.
For Sany Cylinder Seal Kit,For Sany Swing Motor Seal Kit,Hydraulic Pump Seal Kit For Sany,Hydraulic Pump Seal Kit Sany
Safe Seal Technology Co., Ltd. , https://www.sprsealkits.com