Rims 19*8.5j 19*9.5j Aluminium 5*120 Replica BMW Alloy Wheels

Model NO.: FCY0173
Spoke Type: Equal Diameter Spoke
Certification: ISO, VIA, CE, TUV, DOT
Wheel Hub Brand: Customized/Forcar
Process: Casting & Forged
Materials: Aluminum A356.2 & T6
Finish/Color: Customized
Brand: Customized
Size: 10-32inch
Certificates: Via Jwl TUV ISO
PCD: OEM
CB: OEM
Et: OEM
Product Name: BMW Alloy Wheels
Trademark: Customized/Forcar
Transport Package: Plastic Foam/Box/Protection Ring
Specification: 10inch to 32inch
Origin: China
HS Code: 87087091
Here is Bruce from Shandong Forcar Motorsport Group Company. With over 10 years experience designing and manufacturing alloy wheels, Forcar Motorsport wheels and Forcar Motorsport design team win the trust and praise among all clients. We also can provide special services for Aluminum Alloy wheels , Alloy wheels, car aluminum alloy wheel,car wheels ,rims ,wheel rims ,dish, OEM acceptable. Please allow me briefly introduce as follows:

Product Introduction:

Forcar Aluminum A356.2 Casting & T6 Forged Alloy Wheels from 10inch to 28inch with VIA, JWL, TUV, ISO, DOT certificates;
1. Chemical composition : A356&A356.2 alloy steel(Si 6.5-7.5,Mg 0.30-0.45,Ti<0.2,Fe<0.12 Mn<0.1 Cu<0.05 Zn<0.05 Al)
2. Finishing:black,silver,gunmetal,matt black,grey,hyper black,hyper silver,machined face,machined lip,color line,chrome,vacuum chrome,anodized,full polish,milling, sand blast, two colors, etc.
3.Process: lower pressure, Gravity casting, Forged 
4. Quality Guarantee: ISO/TS 16949:2000quality system, German TUV,America SFI,DOT ,Japanese VIA,JWL ,ISO 9001:2008quality system,the national mandatory "C" certification

Rims 19*8.5j 19*9.5j Aluminium 5*120 Replica BMW Alloy Wheels


OEM PROCESS:

1. Design according to customer's sample or photos;
2. Making a new design according to different wheels pattern or concept;
3. Making original design according to customer's sketch or concept drawing;
4. Car Fitment Checking;
5. Strength simulation and optimization before mold development
Wheel Rims Sample or Pictures→Deposits→ Drawings→Mould→Production→Wheel Sample→Testing (strict quality control including X-Ray, Air Tightness, Bending, Impact, Blance, CMM, Salt Spray...)Rims 19*8.5j 19*9.5j Aluminium 5*120 Replica BMW Alloy Wheels

FACILITY EQUIPMENT & CAPACITY
Rims 19*8.5j 19*9.5j Aluminium 5*120 Replica BMW Alloy Wheels
Testing before Packing
Rims 19*8.5j 19*9.5j Aluminium 5*120 Replica BMW Alloy Wheels


Packing & Loading: International Packing Cartons; Plastic Bag; Protection Bag;

Rims 19*8.5j 19*9.5j Aluminium 5*120 Replica BMW Alloy Wheels

Delivery Time

If stocks, the delivery time is immediate after receiving deposits; if from catalog or OEM, the delivery time is about 45 days after receiving deposits; If open new mould, it will take about 70 days after confirm the drawings.

Design and Manufacture Alloy Wheel Rims, WE ARE MORE PROFESSIONAL!!!

PROFESSION; PASSION, PERFORMANCE, PRECISION, PERFECT SALE-SERVICE

Rims 19*8.5j 19*9.5j Aluminium 5*120 Replica BMW Alloy Wheels


AFTER-SALES SERVICES & WARRANTY

Forcar Motorsport Wheels offers a manufacture defect warranty covering the finish of the wheel to the original retail purchaser for one year from the date of purchase. This limited warranty states that our wheels will be free from paint surface and finish issues due to defects in material and workmanship under normal and intended use. We stand behind each and every wheel with a lifetime structural warranty, covering any defects that are a result of a manufacturing issue.

The warranty will not apply to any failure in result of off-road use, negligence, accidents, curb and pothole damages, improper tire mounting and installation, alterations or modifications, use of adapters/spacers, or normal wear and tear. Any cosmetic blemishes, flaws, or corrosion due to chemicals, abrasives, negligence or climate conditions will not be covered.

Upon inspection, Forcar Motorsport Wheels will replace the wheel free of charge. 

FAQ

Q: How do you ensure wheel quality?
A: Every wheel is physically tested in compliance with JWL VIA or TUV standard; Our team ensures the production process at every stage and our QC will inspect each procedure as well.

Q: How long does it take to finish the mold development?
A: 20-25days

Q: Can I take a sample first to check the product quality?
A: We can offer one sample for our customers if they open the mold in our company.

Q: In case of quality problem, how do you deal with them?
A: Firstly, you should take the photos or videos and send to us; secondly, we will send you new wheels and cover all charges; Or you can deduct the wheel charges in next order

Q: What can i do if i cannot find any interesting wheels in your website?
A: Contact us on line or send us email then we can send you our catalogues.

Q: Can you help me build a new brand in my market?
A: yes, we can.

Q: How to order and make a payment?
A: After your selection, we will make you a PI. You can pay the deposits by T/T bank transfer or open the 100% irrevocable L/C at sight from your bank.

PACKING CARTON SIZES
wheel size carton size CBM   PCS/20GP PCS/40GP PCS/40HQ
    5.69*2.13*2.18 11.8*2.13*2.18 11.8*2.13*2.72
12X4.5 350X350X155 0.014  68  1846  3833  4827 
13X4.5 375X375X155 0.022  68  1193  2477  3120 
13X4.5(double layer) 375X375X300 0.042  68  616  1280  1612 
13X5.0 375X375X170 0.024  68  1088  2259  2844 
13X5.5 375X375X180 0.025  68  1027  2133  2686 
13X5.5(double layer) 375X375X350 0.049  68  528  1097  1382 
13X7.0 375X375X220 0.031  68  840  1745  2198 
14X5.0 400X400X170 0.027  68  956  1985  2500 
14X5.0(double layer) 400X400X325 0.052  68  500  1038  1308 
14X5.5 400X400X180 0.029  68  903  1875  2361 
14X6.0 400X400X195 0.031  68  833  1731  2179 
14X6.0(double layer) 400X400X370 0.059  68  439  912  1149 
14X6.5 400X400X205 0.033  68  793  1646  2073 
14X7.0 400X400X220 0.035  68  739  1534  1932 
15X5.0 425X425X170 0.031  68  847  1759  2215 
15X5.0(double layer) 425X425X325 0.059  68  443  920  1158 
15X5.5 425X425X180 0.033  68  800  1661  2092 
15X6.0 425X425X195 0.035  68  738  1533  1931 
15X6.5 425X425X205 0.037  68  702  1458  1836 
15X7.0 425X425X220 0.040  68  654  1359  1711 
15X7.5 425X425X230 0.042  68  626  1300  1637 
15X8.0 425X425X245 0.044  68  588  1220  1537 
15X10 425X425X295 0.053  68  488  1013  1276 
15X12.5 425X425X355 0.064  68  405  842  1060 
16X6.0 455X455X195 0.040  68  644  1338  1684 
16X6.5 455X455X205 0.042  68  613  1272  1602 
16X7.0 455X455X220 0.046  68  571  1186  1493 
16X7.5 455X455X230 0.048  68  546  1134  1428 
16X8.0 455X455X245 0.051  68  513  1065  1341 
16X9.0 450X450X270 0.055  68  476  988  1244 

 

Axial Air Cooler

Air cooler parts Co., Ltd. , http://www.jsprotectivefilm.com