Rice Combine Harvester-Ruilong
| ITEMS | DESCRIPTION |
| Feeding Capacity (KG/s)Â | 4.0 |
| Weight (KGS) | 2800 |
| Main Standard Configuration | Â |
| Working Dimension L*W*H (mm)Â | 4960*3514*2830Â |
| Ground Clearance(mm) | 320 |
| Travelling Speed(km/h) | 0.9-6.5 |
| Work Efficiency (ha/h) | 0.27-0.72 |
| Total Loss | Less than 2.0% |
| Total Imputity | Less than 1.5% |
| Total Breakage | Less than 1.5% |
| Diesel Engine | Â |
| Model | Changchai 4L88 |
| Type | Vertical, Water-cooling, 4*4 strokes Direct Inject |
| Rated Power/Rotating Speed | 85HP/2600rpm |
| Fuel Consumption(kg/hm2)Â | 12~30 |
| Fuel Capacity (L) | 130 |
| Gear Box& HST | Â |
| Gear Box | 85 type hydraulic Gear Box |
| HST | 45CCÂ |
| Rubber Track | Â |
| Size (mm) | 500mm*51*90 mm |
| Length of Ground Contact (mm) | 1700mm |
| Average Contact Pressure(kpa[kgf]/cm2) | ≤18Kpa |
| Header Platform &Conveyor Trough | Â |
| Cut Width | 2000mm |
| Size Reel Bat Dia. × Length (mm) | ∮900×1900mm |
| Adjust means of Reel Bat | Constant speed by hydraulic control |
| Conveyor Trough | Widen Conveyor Trough with Reverse Lever |
| Thresher& Separating Unit |  |
| Threshing Type | Axial Flow, Beat Bar |
| Thresher Rotor | ∮620*2000 |
| Rotating Speed | 662/732 |
| Air Blow | Eccentric Fan, 3 Blow Forces |
| Area of Sieves (Low and Up Sieves) (m2) | 1.645 |
| Grain Tank | Â |
| Augers | Seed Augers, Impurity Augers, Unload Augers |
| Grain Tank | 0.3m³ |
| Grain Unloading |  bagging rice type |
| Others | Â |
| Cabin/Sun-roof | Sun-roof |
| Alarms | Water Temperature, Battery, Oil, Grain Tank, Jam of 2# Auger |
| Crops | Rice ,Wheat ,Rapeseed |
| ITEMS | DESCRIPTION |
| Feeding Capacity (KG/s)Â | 4.0 |
| Weight (KGS) | 2800 |
| Main Standard Configuration | Â |
| Working Dimension L*W*H (mm)Â | 4960*3514*2830Â |
| Ground Clearance(mm) | 320 |
| Travelling Speed(km/h) | 0.9-6.5 |
| Work Efficiency (ha/h) | 0.27-0.72 |
| Total Loss | Less than 2.0% |
| Total Imputity | Less than 1.5% |
| Total Breakage | Less than 1.5% |
| Diesel Engine | Â |
| Model | Changchai 4L88 |
| Type | Vertical, Water-cooling, 4*4 strokes Direct Inject |
| Rated Power/Rotating Speed | 85HP/2600rpm |
| Fuel Consumption(kg/hm2)Â | 12~30 |
| Fuel Capacity (L) | 130 |
| Gear Box& HST | Â |
| Gear Box | 85 type hydraulic Gear Box |
| HST | 45CCÂ |
| Rubber Track | Â |
| Size (mm) | 500mm*51*90 mm |
| Length of Ground Contact (mm) | 1700mm |
| Average Contact Pressure(kpa[kgf]/cm2) | ≤18Kpa |
| Header Platform &Conveyor Trough | Â |
| Cut Width | 2000mm |
| Size Reel Bat Dia. × Length (mm) | ∮900×1900mm |
| Adjust means of Reel Bat | Constant speed by hydraulic control |
| Conveyor Trough | Widen Conveyor Trough with Reverse Lever |
| Thresher& Separating Unit |  |
| Threshing Type | Axial Flow, Beat Bar |
| Thresher Rotor | ∮620*2000 |
| Rotating Speed | 662/732 |
| Air Blow | Eccentric Fan, 3 Blow Forces |
| Area of Sieves (Low and Up Sieves) (m2) | 1.645 |
| Grain Tank | Â |
| Augers | Seed Augers, Impurity Augers, Unload Augers |
| Grain Tank | 0.3m³ |
| Grain Unloading |  bagging rice type |
| Others | Â |
| Cabin/Sun-roof | Sun-roof |
| Alarms | Water Temperature, Battery, Oil, Grain Tank, Jam of 2# Auger |
| Crops | Rice ,Wheat ,Rapeseed |
Railway parts casting is one branch of carbon steel precision casting, which is widely used in railway markets. Precision Casting Of Railway Parts adopts lost wax casting, also called investment casting.
In wax pattern process,we mix stearic acid and paraffin wax. In wax pattern making, as you know, it is better than polyethylene, and the wax deformation is small. In dipping slurry process,most of the suppliers adopt water glass technics in domestic area,but we adopt compound technics or silica sol technics. As you know, carbon steel castings will be much smoother with compound technics (compound of water glass and silica sol technics),this method is so popular with our customers, and the quality is higher than water glass technics, the cost is lower than silica sol technics.
In shell making,we adopt automatic sand-covering production line, which was invented under the guidance of our general manager.The indoor temperature was controlled by air-conditions,keeping the temperature at 24℃±1℃, which can make the castings much more stable,the internal tissues much more well-proportioned.
Our railway parts as precision casting products have quality assurance in accordance with ISO9001: 2008, strict material inspection and exact dimension control, with 100% quality control. OEM order is welcome. The parts can be made completely based on your specifications such as drawing, design, sample etc.
Technical Parameter
| Surface Roughness: Ra 12.5 | Machining Tolerance:+/-0.01 mm |
| Certification: ISO 9001:2008 | Standard: ASTM. AISI. DIN. BS. JIS. NF |
| Heat Treatment: Quench and Temper by 2 sets box type furnaces | Inspection: Mt/Ut/Rt/100% Visual+100% Gage/CMM |
| Dimensions: OEM Customized/Customer's Drawing | Tolerance: as drawing |
| Trademark: JL | Package: Fumigation-free wooden case |
| Specification: Precision casting | Weight: 0.5-50(kgs) |
Precision Casting Of Railway Parts
Precision Casting Of Railway Parts,Investment Castings for Railway Parts,Railway Parts Precision Casts,Steel Cast for Railway Part
Wei fang junlong precision casting Co.,Ltd , https://www.junlongcasting.com