Natural Rubber Airbag as Ship Launching Tool
1. Rubber airbag design scientific and reasonable application rubber airbag, prefabricated or site pouring out of the finished product, all can satisfy slabs component design requirements, and rubber airbag simple operation, save work, save time, save material.
2. Rubber airbag has good ageing resistance performance, service life long features rubber airbag using synthetic rubber, natural rubber and fibre strengthen layer is made after sulfide. Has very good resistance to bilge strength and elastic, flexibility, rubber airbag can satisfy various working conditions in the construction use.
3. Rubber airbag applicable temperature in - 10 Degrees Celsius~ widely + 90 Degrees Celsius, within the scope of the rubber airbag material won't change.
4. Rubber airbag for Bridges, building site construction lightened provides necessary conditions prestressed concrete hollow slab of concrete component, because use rubber airbag, its weight than the prestressed solid component light above 20%, so reducing the weight of the upper structure of building, can make the pile foundation shorten, span increases, safe and convenient onsite construction.
5. Rubber airbag construction technology, simple, safe, health use rubber airbag, only a few simple tools, no special process.
| Marine Ship Rubber Airbag SPECIFICATION | |||||
| Â DIAMETER |
WORKING PRESSURE | WORKING HIGHT | GUARANTEED BEARING CAPACITY PER UNIT LENGTH | ||
| KN/m | T/M | Lb/ft | |||
| Â Â D=1.2m (D=3.94FT) |
  0.17Mpa (24.66psi) |
0.7m(2.296ft) | 133.61 | 13.62 | 9154 |
| 0.6m(1.968ft) | 160.30 | 16.34 | 10983 | ||
| 0.5m(1.640ft) | 187.08 | 19.07 | 12818 | ||
| 0.4m(1.312ft) | 213.76 | 21.79 | 14646 | ||
| 0.3m(0.984ft) | 240.44 | 24.51 | 16474 | ||
| 0.2m(0.656ft) | 267.22 | 27.24 | 18309 | ||
| Â Â Â D=1.5m (D=4.92ft) |
   0.13Mpa (18.85psi) |
0.9m(2.952ft) | 122.63 | 12.50 | 8402 |
| 0.8m(2.624ft) | 143.03 | 14.58 | 9800 | ||
| 0.7m(2.296ft) | 163.43 | 16.66 | 11198 | ||
| 0.6m(1.968ft) | 183.94 | 18.75 | 12602 | ||
| 0.5m(1.640ft) | 204.34 | 20.83 | 14000 | ||
| 0.4m(1.312ft) | 224.75 | 22.91 | 15398 | ||
| 0.3m(0.984ft) | 245.15 | 24.99 | 16797 | ||
| Â Â D=1.8m (D=5.90ft) |
  0.11Mpa (15.95psi) |
1.1m(3.608ft) | 120.96 | 12.33 | 8287 |
| 1.0m(3.280ft) | 138.22 | 14.09 | 9470 | ||
| 0.9m(2.952ft) | 155.59 | 15.86 | 10660 | ||
| 0.8m(2.624ft) | 172.85 | 17.62 | 11843 | ||
| 0.7m(2.296ft) | 190.22 | 19.39 | 13033 | ||
| 0.6m(1.968ft) | 207.48 | 21.15 | 14216 | ||
| 0.5m(1.640ft) | 224.75 | 22.91 | 15398 | ||
| 0.4m(1.312ft) | 242.01 | 24.67 | 16581 | ||
| 0.3m(0.984ft) | 259.38 | 26.44 | 17771 | ||
| 0.2m(o.656ft) | 276.64 | 28.20 | 18954 | ||
| Â NOTE : THE ABOVE VALLUE IS FOR REFERENCE ONLY . IT IS SUBJECT TO CHANGE IN ACCORDANCE WITH ACTUAL FENDER SYSTEM DESIGN . YOU CAN CHOOSE THE REQUIRED OF SHIPS AND BOATS OF ALL SIZES. WE WILL MEET YOUR PROJECTS/SUPPLIED UPON CLIENTS REQUEST . | |||||
Lead Stearate is white powder, insoluble in water, soluble in hot ethanol, benzene and turpentine, dissolved by heating in organic solvents and becomes gelatinous after cooling, decomposed into Stearic Acid and corresponding salt when meeting strong acid, with hygroscopicity. Lead stearate can be used as heat stabilizer and lubricant of Polyvinyl Chloride, with good lubricity and light and heat stability. It has good synergistic effect when used with cadmium soap, barium soap or organic tin compounds, and can be used in various opaque hard and soft PVC products, such as hard pipes, hard boards, sheets, films and artificial leather, especially for wire and cable materials, which can give the products excellent electrical properties. It is also used as anti-sedimentation agent for paints, water-releasing agent for fabrics, thickening agent for lubricants, heat-resistant stabilizer for plastics, etc. It is used as stabilizer for opaque soft and hard PVC products.
Lead Stearate,Chemical Lead Stearate,Thickener Lead Stearate,Lead Stearate Raw Material
Hebei Fengse New Material Technology Co.ltd. , https://www.fengsechemicals.com