How to choose a lifting column

To choose a lifting column, you need to care about the following:

1. Width of the channel: The width of the channel to be managed determines the number of devices that need to be used. Normally, the center distance of the column is not more than 1.5 meters. Different places of use can control the pitch width according to their actual needs.

2. Traffic flow: This is one of the important parameters for selecting a product, but users often ignore this parameter. If you are a professional equipment supplier, you should first understand the traffic volume of the installation site (especially during peak hours) before recommending the product.

Group management: Whether the user needs to separate the lanes in and out, or group management by lane, determines the configuration and selection of the entire control system.

Rainfall and drainage: Since the lifting column needs to be buried deep below the ground, it will inevitably be soaked in the water. If the use of the site is heavy, the probability of heavy rain, the drainage system is not good enough, the terrain is low or the groundwater is shallow, the user Be sure to pay attention when installing the equipment, because you may choose to hold it in the water for a long time. In addition to doing the basic work of drainage, you should also consider the structure of the equipment and other factors, which will be unreliable or high-voltage. A very dangerous thing when the equipment is soaked in water.

Location of the installation site: If the installation site belongs to a geographically remote area, it is necessary to consider whether the equipment is easy to maintain when selecting equipment.

The above are the points that need to be paid attention to when selecting the lifting column. If you have any questions about how to choose the lifting column, please consult us and we will try our best to help you.