"
Model NO.: PS127
Impeller: Brass / Stainless Steel / PPO
Brand: OEM
Motor Sheet: Cold Rolled Silicon Steel
Mechanical Seal: NBR / Ceramic / Carbon
Insulation: B/F
Protection: IP44
Rotor: Cold Rolled Silicon Steel
Stator: Cold Rolled Silicon Steel
Trademark: GORDON
Transport Package: Foam + Carton + Pallet
Specification: Jet Pump
Origin: Fu'an, China
HS Code: 8413709990
Domestic Copper Wire Self-Priming Gardon Water Pump with Brass Impeller
Pump
>> Pump Body: Cast Iron with Special Anti-Rust Treatment
>> Impeller: Stainless Steel, Brass, or PPO
>> Mechanical Seal: Carbon / Ceramic / Stainless Steel
Motor
>> Integrated Thermal Protector for Single Phase Motor
>> Motor with Copper Winding
>> Motor Housing: Steel Plate or Aluminum Alloy
>> C&U Bearing
>> AISI 304 Shaft or 45# Carbon Steel
Working Range
>> Liquid: Clean, Non-Aggressive, No Suspended Solids
>> Liquid Temperature: -10°C to +100°C
>> Ambient Temperature up to +40°C
>> Max. Working Pressure: 10 bar
>> Continuous Service S1
>> Insulation: B
>> Protection: IP44
Application
>> Household Water Supply
>> Water Supply System
>> Cooling System
>> Boost System
PS127 SERIES INTELLIGENT WATER PUMPS FOR COLD AND HOT WATER
1. Self-priming: Fill the pump chamber with water before first use.
2. Automatic: Starts when the tap is turned on, stops when it’s turned off.
3. Booster: Stabilizes pressure using sensors for consistent performance.
Additionally, a thermal protector in the motor will cut power if overheating occurs.
Technical Data
Model |
HP |
W |
Current (A) |
Capacitor (uf) |
H.Max (M) |
Q.Max (L/min) |
Pipe Size |
PS-127 |
0.5 |
370 |
1.8 |
10 |
32 |
35 |
1" X 1" |
    Â
Production Work-flow Chart of Pump
                                                  About Us
    Fujian Gordon Pump Industry Co., Ltd is located in Fu’an City, known as the capital of small appliances. Our brand, Gordon, is well recognized in the industry. We have a strong technical team and are committed to automation and quality. Our goal is to become a top-tier pump manufacturer.


FAQ
Q: Are you a trading company or manufacturer?
A: We are a manufacturer.
Q: What is your delivery time?
A: Usually 5-10 days if in stock; 15-20 days if not in stock, depending on quantity.
Q: Do you offer samples? Are they free?
A: Yes, we can provide samples at no cost, but shipping fees are not included.
Q: What are your payment terms?
A: For payments under USD 1000, full payment in advance. For over USD 1000, 30% T/T in advance, balance before shipment.
"All Steel Radial Tire Curing Bladders(TBR)
All Steel Radial Tire Curing Bladders(Tbr),All Steel Radial Tire Curing Bladders,Tire Curing Bladder,All Steel Radial Tyre Bladder
Jiangsu Junfeng New Material Co., Ltd. , https://www.junfengtirebladder.com