Boat Anchor Buoyancy for Ship Maker

Origin: Shandong, China

Boat Anchor Buoyancy

General surface support buoys are widely used in single-point mooring (SPM) systems. There are three main types of buoys commonly employed:

  1. Cylindrical Buoys.
  2. Chain-through Buoys.
  3. Pick-up Buoys.

Material Specifications:

  • Swivel assembly: conforms to BS 970
  • Gaskets and flanges: carbon steel to BS EN 10025 Fe 430 A or B
  • Central tube: meets BS 6323 Pt 3 HFS 5 standards

Finish:

  • Swivel assembly: hot dip galvanized to BS 729 Zn2/Zn4 at 610 g/m²
  • Steel parts: coated with coal tar epoxy paint
  • Surface color: available in orange, yellow, and other custom options

Subsea Buoyancy

Evergreen is capable of manufacturing buoyancy materials for subsea applications up to 7,000 meters. Our advanced subsea buoyancy technology enables the production of a wide range of buoyancy solutions, including subsurface mooring buoys, cable floats, pipeline buoys, ROV buoyancy modules, special buoys, and other syntactic foam products.

Our high-performance subsea buoyancy material and syntactic foam offer the following key features:

Item Unit Value
500m 1000m 1500m 4500m
Density g/cm³ ≤0.4 ≤0.45 ≤0.5 ≤0.6
Compressive Strength MPa ≥5 ≥10 ≥15 ≥40
Hydrostatic Pressure MPa ≥5 ≥10 ≥15 ≥37
Water Absorption % ≤2 (5MPa, 24h) ≤2 (10MPa, 24h) ≤2 (15MPa, 24h) ≤2 (40MPa, 24h)

Advantages of Evergreen Pick-up Buoys

  • Advanced framework design for enhanced performance
  • Over 20 years of experience in marine buoy development, continuously improving through innovation
  • Durable and practical for long-term use
  • Flexible and easy to install
  • Safe and reliable under various conditions
  • Economical and backed by excellent after-sales service
  • Wide range of end fittings to choose from
  • Strong technical support available
  • Resistant to abrasion with a tough outer skin
Boat Anchor Buoyancy for Ship Maker

Whether you're looking for reliable buoyancy solutions for offshore operations, deep-sea exploration, or marine infrastructure, Evergreen provides high-quality, customized buoyancy systems tailored to your specific needs. Our products are designed to meet the most demanding environments while ensuring safety, efficiency, and cost-effectiveness.

Automobile Cast Film Line

Delving Into Automotive Cast Films and Production Technology
The vehicles we drive are marvels of not just engineering, but also material science. At the core of these material innovations are "Automobile Cast Film Lines," which are critical systems used for producing the specialized films found in various car components, enhancing both aesthetics and functionality.
Where Cast Films Make a Difference in Your Car:
In the realm of automotive design and safety, cast films have several applications
Interior Films: Look inside your vehicle at the dashboard, door panels, or other trim elements and you'll likely find films made from durable materials like polypropylene (PP) or ABS (Acrylonitrile Butadiene Styrene). These provide a surface that's resilient to daily wear and tear and customizable in appearance to fit vehicle aesthetics.
Functional Films: Move to the engine compartment and you'll see cast films in parts such as air ducts and radiator grilles. These are often designed to be heat resistant or flame retardant, contributing to the overall safety of the vehicle.
Protective Films: As an optional upgrade, paint protection film is applied to a vehicle's exterior to safeguard the paint-shielding it from minor scratches, harmful UV rays, and other environmental factors.
Crafting Cast Films for the Automotive Industry:
"Automobile Cast Film Lines," also known under names like "Car Cast Film Line" and "Auto-Casting Film Machine," operate through a process known as cast film extrusion. In this process, plastic material is melted, shaped into a continuous wide and thin layer, cooled, and then neatly rolled. These lines may sometimes involve additional equipment, such as a "Multi Functional Stretching Film Machine," which allows for the film's properties to be finely tuned for specific requirements.
Choosing the Best Cast Film Line for Production
When considering an "Automobile Cast Film Line" for manufacturing needs, keep in mind:
Type of Film: Different car parts require films with varying material compositions and thus different production setups. For instance, lines for making PP interior films are distinct from those making films for the heat-exposed engine area.
Film Characteristics: Important properties like film thickness, strength, and the desired finish must align with the car part it's destined for.
Production Capacity: The capacity of the "Automobile Cast Film Line" should match your projected production volume to ensure efficiency and supply demands are met.
Advancements in Cast Film Production and Future Outlook:
The industry producing automotive films is constantly advancing. "Automobile Cast Film Lines" are evolving with a focus on lighter, more sustainable materials and adding innovative features. Gaining insight into how these machines, such as the "Auto-Casting Film Machine," create different types of films deepens our understanding of the complex details behind the car components we often take for granted.

Automobile Cast Film Line,Car Cast Film Line,Auto-Casting Film Machine,Multi Functional Stretching Film Machine

Baijia Mechanical Equipment (Huizhou) Co., Ltd. , https://www.castfilmmachine.com